Double Stick Tape Company is a manufacturer of double sided mounting tape for surface bonding, sign mounting, trim attachment, nameplate fixing, panel assembly, and selected architectural bonding work. This category includes acrylic foam bonding tape, clear mounting tape, thick bond line tapes, slit rolls, sheets, strips, and die-cut mounting parts for metal, glass, plastic, painted panels, and decorative components. It is built for production teams that need consistent adhesion, practical substrate guidance, and tape formats that fit repeated assembly instead of one-off hand application.
Typical use: metal, glass, plastic, signage, appliance trim, cladding, and decorative panel assembly.
Showing all 3 results
Double sided mounting tape is used where a clean surface bond is preferred over visible screws, rivets, weld marks, or liquid adhesive overflow. The main purpose is not compression sealing or simple cushioning. A good mounting tape must wet out the surface, keep a stable bond line, resist edge peel, and hold the part in the real load direction after installation.
Metal and glass usually provide more predictable bonding after cleaning. Plastic, painted panels, powder-coated surfaces, and composite materials need closer checking because surface energy, coating stability, and release-agent residue can change the result.
This range is grouped by bonding surface, bond line visibility, part size, and application method. Acrylic foam bonding tape is commonly selected for high-bond attachment on metal, glass, painted panel, and plastic assemblies. Clear grades are used where the bond line should be less visible, such as acrylic sheet, display windows, and glass components. Gray or black tapes are often used behind trims, signs, appliance panels, and dark decorative parts.
Start with the surface, not the tape thickness. Aluminum, stainless steel, glass, acrylic, PC, ABS, painted metal, powder-coated panel, and composite board do not bond in exactly the same way. Smooth high surface energy materials usually allow better adhesive wet-out after cleaning. Low surface energy plastic, textured plastic, silicone-modified material, oily metal, or unstable coating may need modified acrylic adhesive, primer evaluation, or a wider bonding area.
Surface preparation is also part of product selection. The bonding area should be dry and free of dust, oil, moisture, loose coating, release agent, and cleaning-film residue. A reference bonding pressure around 100 kPa, or firm roller pressure on rigid parts, helps the pressure-sensitive adhesive contact the surface instead of bridging over texture or trapped air.
Load testing should be done after the tape has been applied under the same surface, pressure, temperature, and dwell-time conditions expected in production. For double sided mounting tape, a quick hand-pull immediately after bonding only shows initial tack. It does not confirm final holding strength.
A more useful test checks the bonded sample after 24 hours and again after 72 hours. This is especially important for parts carrying vertical shear load, outdoor stress, vibration, or edge peel force. For metal panels, glass parts, plastic trims, nameplates, and signs, the sample should be tested in the same direction as the final assembly.
Item Typical Range / Customizable Value
Product category High-bond double sided mounting tape for surface bonding, panel attachment, sign mounting, trim bonding, and structural support positioning
Adhesive system Acrylic adhesive, modified acrylic adhesive, high-bond pressure-sensitive adhesive
Core / carrier structure Acrylic foam core, conformable bonding layer, thick bond line mounting structure
Total thickness 0.25-3.0 mm, selected by bond line, surface texture, and load condition
Common width 3-1000 mm slit width, wider log roll supply available by production plan
Finished roll length 10-50 m for standard rolls, custom roll length available for converting or assembly use
Color options Clear, white, gray, black
Release liner PE film liner, paper liner, easy-release liner, extended liner, split liner, liner overhang available
Application temperature reference Commonly 15-40 C, final range depends on adhesive grade and substrate
Surface preparation Clean, dry, free of oil, dust, moisture, loose coating, and release agent
Slitting tolerance Commonly +/-0.5 mm, depending on width and roll structure
Die-cut tolerance Commonly +/-0.2 mm, depending on part size, shape, and liner design
Liner design Flush liner, extended liner, split liner, liner overhang, tab position available for easier removal
Double Stick Tape Company can adjust this category around substrate, assembly method, and production workflow. Width, thickness, color, roll length, adhesive grade, liner type, release force, and winding direction can be matched to manual bonding, fixture-assisted assembly, or automatic dispensing. For slit rolls, a common tolerance reference is +/-0.5 mm, depending on width and roll structure. For die-cut mounting parts, a common tolerance reference is +/-0.2 mm, depending on shape, size, tool design, and liner structure.
A mounting bond often fails because the tape is selected only by thickness or advertised holding power while the actual surface is ignored. Metal may carry oil, oxidation, or powder coating residue. Glass may look clean but still have dust, moisture, or cleaning-agent film. Plastic is more sensitive because some materials have low surface energy and need a suitable adhesive system, surface treatment, or primer check before repeated production.
It can reduce or replace some screws, rivets, or liquid adhesive in suitable designs, especially for signs, trim, nameplates, and decorative panels. The decision should be based on substrate, bond area, shear direction, surface preparation, working temperature, and sample load testing.
Initial tack develops quickly, but final bond strength builds over time. For many acrylic adhesive mounting tapes, 24 hours is useful for an early check, while 72 hours gives a better view of final holding performance before full load or field installation.
