No products were found matching your selection.

Other Related Products

  • Semi Closed Cell EPDM Foam

    • Thickness: 3 mm-30 mm typical range for strips, rolls, and sheets
    • Density: 80-130 kg/m3 for soft compression and recovery
    • Color: black, grey, or project-specific color options
    • Material: semi-closed cell EPDM sponge for controlled sealing
    • Backing: plain foam or PSA laminated foam with release liner
    • Use: automotive HVAC, access panels, air ducts, and converted foam strips
    Read moreDone

  • EPDM Open Cell Foam – Versatile and Customizable Foam Solutions

    • Material: EPDM Open Cell Foam (Flexible, Lightweight, and Insulating)
    • Thickness: Available from 1/8 inch to 2 inches
    • Color Options: Typically Black, with custom colors available
    • Density: Customizable for specific application requirements (Low to Medium Density)
    • Shape: Supplied in sheets, rolls, or custom-cut pieces for precise application
    • Temperature Range: -40°C to +120°C, ideal for both cold and hot environments
    Read moreDone

  • Building Construction Acrylic Foam Tape

    • Thickness: 0.4 mm, 0.8 mm, 1.1 mm, 1.6 mm, 2.0 mm, 2.3 mm
    • Colors: gray, black, white, clear on request
    • Core: closed-cell acrylic foam
    • Adhesive: high-bond acrylic PSA
    • Liner: red PE film or release paper
    • Format: slit rolls, strips, pads, kiss-cut and die-cut parts
    Read moreDone

  • EPDM Foam Adhesive Tape

    • Common size: 1 mm-20 mm thickness, custom slit width
    • Color: black EPDM foam, liner color optional
    • Material: closed cell EPDM foam carrier
    • Adhesive: single-sided or double-sided PSA
    • Liner: kraft paper, PE-coated paper, or film liner
    • Use: sealing, cushioning, bonding, gasket converting
    Read moreDone

  • Firm Grade EPDM Sponge

    • Material: Firm-grade closed-cell EPDM sponge
    • Color: Black as standard
    • Density: 180-220 kg/m3 typical reference
    • Thickness: 2mm-50mm sheet and roll options
    • Format: Sheet, roll, slit strip, die-cut pad
    • Backing: Plain or adhesive-backed for positioning
    Read moreDone

  • PET Heat Resistant Double Sided Tape

    • Material: PET film carrier with double-coated acrylic adhesive
    • Color: Transparent tape with red, yellow, or clear release liner
    • Thickness: 0.05 mm, 0.10 mm, 0.125 mm, 0.20 mm
    • Width: 3 mm-1240 mm slit rolls available
    • Length: 50 m, 100 m, or jumbo roll format
    • Processing: Slitting, die cutting, kiss cutting, sheet cutting
    Read moreDone

  • PE Foam Adhesive Tape

    • Material: PE foam carrier with acrylic or rubber PSA
    • Structure: Single-sided or double-sided adhesive coating
    • Thickness: 5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
    • Color: White, black, grey, or project-based color
    • Liner: Paper liner or PE film liner for converting
    • Use: Cushioning, spacing, light sealing, fixing, and die-cut parts
    Read moreDone

  • Rubber Foam Seal Tape

    • Material: NBR/PVC foam gasket tape
    • Color: Black
    • Structure: Closed-cell rubber foam
    • Adhesive: Single-sided PSA backing
    • Liner: Paper or film release liner
    • Formats: Rolls, strips, die-cut parts
    Read moreDone

  • Double Sided Foam Tape Jumbo Roll

    • Material: PE foam or EVA foam with double side adhesive coating
    • Colors: white, black, grey, or production color by request
    • Thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
    • Jumbo width: 1030 mm, 1040 mm, or 1200 mm typical
    • Adhesive: solvent acrylic, hot melt, or water-based acrylic
    • Format: jumbo roll, master roll, log roll, slit roll, or trial roll
    Read moreDone