No products were found matching your selection.
Other Related Products
-
- Material: PE foam or EVA foam with double side adhesive coating
- Colors: white, black, grey, or production color by request
- Thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Jumbo width: 1030 mm, 1040 mm, or 1200 mm typical
- Adhesive: solvent acrylic, hot melt, or water-based acrylic
- Format: jumbo roll, master roll, log roll, slit roll, or trial roll
-
This double sided tape data sheet explains how construction, thickness, peel adhesion, tack, static shear, temperature and storage data should be interpreted together. It applies to carrier-based and foam-supported pressure-sensitive double-sided tapes used on metal, glass, plastics and coated surfaces. Typical values are reference data rather than universal claims. Surface condition, application pressure, dwell, environment and load can change results, so the selected grade should be confirmed on representative samples before production release.
-
- Material: Closed cell neoprene sponge rubber
- Adhesive: Single-side acrylic PSA
- Color: Black as standard
- Thickness: 1.5-25 mm typical range
- Width: Slit rolls from 6 mm and above
- Liner: Paper or film release liner
-
- Common width: 15 cm, 20 cm, 25 cm, 30 cm, or custom
- Roll length: 5 m, 10 m, 20 m, 50 m, 100 m, 300 m, or custom
- Color: green backing, white liner, or project-based option
- Backing material: non-woven fabric, PP cloth, PET film, or composite backing
- Adhesive option: hot melt, acrylic, or used with turf adhesive glue
- Type: single-sided, double-sided, self adhesive, or glue-applied system
-
EPDM sponge rubber properties should be read with the material grade and test condition. This reference covers closed-cell EPDM sponge for sealing, cushioning, gasket conversion, and PSA-backed constructions. It focuses on density, compression behavior, water absorption, mechanical response, service temperature, and ozone resistance. Use typical data for technical screening; confirm critical values on the intended grade, surface, load, and environment before full use or project approval.
-
- Material: PE foam carrier with acrylic or rubber PSA
- Structure: Single-sided or double-sided adhesive coating
- Thickness: 5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Color: White, black, grey, or project-based color
- Liner: Paper liner or PE film liner for converting
- Use: Cushioning, spacing, light sealing, fixing, and die-cut parts
-
- Common thickness: 2 mm to 15 mm
- Standard color: black EPDM sponge
- Material: closed cell EPDM sponge rubber
- Backing: one-side pressure sensitive adhesive
- Liner: paper or film release liner
- Supply form: rolls, strips, custom slit widths
-
- Common thickness: 2 mm, 3 mm, 5 mm, 6 mm, 10 mm, 12 mm
- Color: Black, grey, charcoal grey, or white
- Material: Low-density open-cell polyurethane foam, 24-48 kg/m3 typical
- Adhesive: Single-side acrylic PSA, 40-70 um typical
- Liner: Paper or film release liner, 80-120 um typical
- Use: Compression sealing, cushioning, dust sealing, and die-cut gaskets
