No products were found matching your selection.
Other Related Products
-
Double sided tape for automotive applications helps attach trim, emblems, interior parts, foam seals and anti-rattle pads without visible screws or liquid adhesive overflow. The right tape should be selected by substrate type, coating condition, bond-line thickness, adhesive chemistry, compression need, application pressure, dwell time, service temperature and load direction. Common risks include trim edge lifting, weak wet-out on textured plastic, foam compression set, difficult liner removal and adhesive transfer during rework. Final selection should be based on real-substrate sample testing and a trial run before repeated assembly.
-
- Material: Closed cell neoprene sponge rubber
- Adhesive: Single-side acrylic PSA
- Color: Black as standard
- Thickness: 1.5-25 mm typical range
- Width: Slit rolls from 6 mm and above
- Liner: Paper or film release liner
-
- Material:PE, EVA, or IXPE foam carrier
- Adhesive:Hot melt PSA coating
- Structure:Single sided or double sided foam tape
- Color:White, black, grey, or custom color
- Thickness:Common 0.5mm to 5mm options
- Surface:Plastic, metal, painted panel, ABS, PP, acrylic
-
- Width: 90mm / 100mm
- Roll Length: 20m / 25m / 50m
- Structure: Kraft paper and fiberglass
- Adhesive: Hot melt glue
- Color: White / yellow / gold
- Use: Carpet back seam joining
-
- Common Width: 10 mm, 15 mm, 20 mm, 25 mm
- Common Thickness: 3 mm, 4 mm, 5 mm, 6 mm
- Color: Black
- Base Material: Fiber, felt, foam, or fiberglass
- Backing: Self adhesive liner
- Use Area: BBQ lid, door, and body edge
-
- Common thickness: 2 mm, 3 mm, 5 mm, 6 mm, 10 mm, 12 mm
- Color: Black, grey, charcoal grey, or white
- Material: Low-density open-cell polyurethane foam, 24-48 kg/m3 typical
- Adhesive: Single-side acrylic PSA, 40-70 um typical
- Liner: Paper or film release liner, 80-120 um typical
- Use: Compression sealing, cushioning, dust sealing, and die-cut gaskets
-
- Common widths: 6 mm to 1240 mm slit rolls
- Thickness options: 0.10 mm to 1.50 mm typical
- Adhesive: Double-sided acrylic PSA coating
- Liner: Red PE release liner, 60-100 um typical
- Tape body: Clear or translucent, not red adhesive body
- Use: Metal, glass, plastic, panel, nameplate, trim bonding
-
- Material: PE foam carrier with acrylic or rubber PSA
- Structure: Single-sided or double-sided adhesive coating
- Thickness: 5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Color: White, black, grey, or project-based color
- Liner: Paper liner or PE film liner for converting
- Use: Cushioning, spacing, light sealing, fixing, and die-cut parts
-
- Material: EPDM sponge sealing bulb with solid EPDM support section
- Color: Black, with other colors available by production request
- Profile types: Hollow bulb, side bulb, top bulb, U-channel edge seal
- Grip range: Common 1-5 mm flange or door-edge range
- Compression guide: 25-40% bulb compression after door closing
- Supply form: Coils, straight cut lengths, joined frames, sample profiles
