No products were found matching your selection.
Other Related Products
-
- Material: Neoprene/EPDM closed-cell foam blend
- Color: Black as standard
- Thickness: 1 mm-40 mm typical range
- Formats: Sheets, rolls, strips, gaskets, tapes
- Adhesive: Plain, acrylic PSA, or rubber PSA
- Use: Indoor and outdoor industrial sealing
-
- Material: Closed-cell EVA foam backing
- Adhesive: Hot melt or acrylic adhesive
- Structure: One adhesive side, one exposed foam side
- Thickness: 1 mm – 10 mm typical range
- Liner: Release paper or release film
- Format: Rolls, strips, sheets, or die-cut pads
-
- Material: NBR/PVC foam gasket tape
- Color: Black
- Structure: Closed-cell rubber foam
- Adhesive: Single-sided PSA backing
- Liner: Paper or film release liner
- Formats: Rolls, strips, die-cut parts
-
- Common size: 1 mm-20 mm thickness, custom slit width
- Color: black EPDM foam, liner color optional
- Material: closed cell EPDM foam carrier
- Adhesive: single-sided or double-sided PSA
- Liner: kraft paper, PE-coated paper, or film liner
- Use: sealing, cushioning, bonding, gasket converting
-
- Common thickness: 0.5mm, 1mm, 1.5mm, 2mm
- Color: clear transparent gel body
- Material: acrylic gel adhesive
- Width: custom slit narrow or wide rolls
- Roll length: 3m, 5m, 10m, 20m, 50m, 100m, 300m
- Core option: 38mm or 76mm paper core
-
- Material: PE foam or EVA foam with double side adhesive coating
- Colors: white, black, grey, or production color by request
- Thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Jumbo width: 1030 mm, 1040 mm, or 1200 mm typical
- Adhesive: solvent acrylic, hot melt, or water-based acrylic
- Format: jumbo roll, master roll, log roll, slit roll, or trial roll
-
- Common thickness: 70um-160um
- Carrier: lightweight tissue paper
- Adhesive: acrylic, hot melt, or rubber PSA
- Color: translucent tape with white or yellow liner
- Formats: jumbo roll, log roll, slit roll, die-cut parts
- Use: paper, plastic film, foam, label bonding
-
- Common widths: 6 mm to 1240 mm slit rolls
- Thickness options: 0.10 mm to 1.50 mm typical
- Adhesive: Double-sided acrylic PSA coating
- Liner: Red PE release liner, 60-100 um typical
- Tape body: Clear or translucent, not red adhesive body
- Use: Metal, glass, plastic, panel, nameplate, trim bonding
-
- Material: closed-cell EPDM sponge rubber
- Color: black standard, color review available
- Formats: sheet, roll, block, slit strip
- Thickness: 1 mm-50 mm typical range
- Density: soft, medium, firm options
- Finish: plain or adhesive-backed surface
