No products were found matching your selection.

Other Related Products

  • Closed Cell EPDM Sponge Rubber

    • Material: closed-cell EPDM sponge rubber
    • Color: black standard, color review available
    • Formats: sheet, roll, block, slit strip
    • Thickness: 1 mm-50 mm typical range
    • Density: soft, medium, firm options
    • Finish: plain or adhesive-backed surface
    Read moreDone

  • Building Construction Acrylic Foam Tape

    • Thickness: 0.4 mm, 0.8 mm, 1.1 mm, 1.6 mm, 2.0 mm, 2.3 mm
    • Colors: gray, black, white, clear on request
    • Core: closed-cell acrylic foam
    • Adhesive: high-bond acrylic PSA
    • Liner: red PE film or release paper
    • Format: slit rolls, strips, pads, kiss-cut and die-cut parts
    Read moreDone

  • Open Cell Polyurethane Foam Tape

    • Common thickness: 2 mm, 3 mm, 5 mm, 6 mm, 10 mm, 12 mm
    • Color: Black, grey, charcoal grey, or white
    • Material: Low-density open-cell polyurethane foam, 24-48 kg/m3 typical
    • Adhesive: Single-side acrylic PSA, 40-70 um typical
    • Liner: Paper or film release liner, 80-120 um typical
    • Use: Compression sealing, cushioning, dust sealing, and die-cut gaskets
    Read moreDone

  • Closed Cell Foam Gasket Tape

    •  Material: closed cell PVC, PE, EPDM, or neoprene blend foam
    •  Structure: single sided PSA with paper or film release liner
    •  Thickness: 1 mm-12 mm, with custom thickness available
    •  Roll width: 5 mm-1000 mm slit rolls or master rolls
    •  Colors: black, gray, white, or custom color by grade
    •  Uses: enclosure, HVAC, cabinet, and equipment panel sealing
    Read moreDone

  • Firm Grade EPDM Sponge

    • Material: Firm-grade closed-cell EPDM sponge
    • Color: Black as standard
    • Density: 180-220 kg/m3 typical reference
    • Thickness: 2mm-50mm sheet and roll options
    • Format: Sheet, roll, slit strip, die-cut pad
    • Backing: Plain or adhesive-backed for positioning
    Read moreDone

  • Semi Closed Cell EPDM Foam

    • Thickness: 3 mm-30 mm typical range for strips, rolls, and sheets
    • Density: 80-130 kg/m3 for soft compression and recovery
    • Color: black, grey, or project-specific color options
    • Material: semi-closed cell EPDM sponge for controlled sealing
    • Backing: plain foam or PSA laminated foam with release liner
    • Use: automotive HVAC, access panels, air ducts, and converted foam strips
    Read moreDone

  • PE Foam Adhesive Tape

    • Material: PE foam carrier with acrylic or rubber PSA
    • Structure: Single-sided or double-sided adhesive coating
    • Thickness: 5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
    • Color: White, black, grey, or project-based color
    • Liner: Paper liner or PE film liner for converting
    • Use: Cushioning, spacing, light sealing, fixing, and die-cut parts
    Read moreDone

  • EPDM Sponge Adhesive Seal

    • Common thickness: 2 mm to 15 mm
    • Standard color: black EPDM sponge
    • Material: closed cell EPDM sponge rubber
    • Backing: one-side pressure sensitive adhesive
    • Liner: paper or film release liner
    • Supply form: rolls, strips, custom slit widths
    Read moreDone

  • Neoprene EPDM Blend Foam

    • Material: Neoprene/EPDM closed-cell foam blend
    • Color: Black as standard
    • Thickness: 1 mm-40 mm typical range
    • Formats: Sheets, rolls, strips, gaskets, tapes
    • Adhesive: Plain, acrylic PSA, or rubber PSA
    • Use: Indoor and outdoor industrial sealing
    Read moreDone