No products were found matching your selection.
Other Related Products
-
- Common thickness: 70um-160um
- Carrier: lightweight tissue paper
- Adhesive: acrylic, hot melt, or rubber PSA
- Color: translucent tape with white or yellow liner
- Formats: jumbo roll, log roll, slit roll, die-cut parts
- Use: paper, plastic film, foam, label bonding
-
- Typical format: die-cut frame, pad, cover, and enclosure gasket parts
- Thickness: 1 mm to 25 mm, matched to gap and compression target
- Material: closed cell EPDM sponge rubber
- Color: black standard, other colors reviewed by requirement
- Backing: plain, PSA backed, or kiss-cut on release liner
- Drawing details: outer size, inner opening, bolt holes, radius, and wall width
-
- Thickness: 3 mm-30 mm typical range for strips, rolls, and sheets
- Density: 80-130 kg/m3 for soft compression and recovery
- Color: black, grey, or project-specific color options
- Material: semi-closed cell EPDM sponge for controlled sealing
- Backing: plain foam or PSA laminated foam with release liner
- Use: automotive HVAC, access panels, air ducts, and converted foam strips
-
- Material: PE foam or EVA foam with double side adhesive coating
- Colors: white, black, grey, or production color by request
- Thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Jumbo width: 1030 mm, 1040 mm, or 1200 mm typical
- Adhesive: solvent acrylic, hot melt, or water-based acrylic
- Format: jumbo roll, master roll, log roll, slit roll, or trial roll
-
- Material: closed cell PVC, PE, EPDM, or neoprene blend foam
- Structure: single sided PSA with paper or film release liner
- Thickness: 1 mm-12 mm, with custom thickness available
- Roll width: 5 mm-1000 mm slit rolls or master rolls
- Colors: black, gray, white, or custom color by grade
- Uses: enclosure, HVAC, cabinet, and equipment panel sealing
-
- Common Width: 10 mm, 15 mm, 20 mm, 25 mm
- Common Thickness: 3 mm, 4 mm, 5 mm, 6 mm
- Color: Black
- Base Material: Fiber, felt, foam, or fiberglass
- Backing: Self adhesive liner
- Use Area: BBQ lid, door, and body edge
-
Double sided tape for automotive applications helps attach trim, emblems, interior parts, foam seals and anti-rattle pads without visible screws or liquid adhesive overflow. The right tape should be selected by substrate type, coating condition, bond-line thickness, adhesive chemistry, compression need, application pressure, dwell time, service temperature and load direction. Common risks include trim edge lifting, weak wet-out on textured plastic, foam compression set, difficult liner removal and adhesive transfer during rework. Final selection should be based on real-substrate sample testing and a trial run before repeated assembly.
-
- Common thickness: 0.5mm, 1mm, 1.5mm, 2mm
- Color: clear transparent gel body
- Material: acrylic gel adhesive
- Width: custom slit narrow or wide rolls
- Roll length: 3m, 5m, 10m, 20m, 50m, 100m, 300m
- Core option: 38mm or 76mm paper core
-
- Thickness: 0.4 mm, 0.8 mm, 1.1 mm, 1.6 mm, 2.0 mm, 2.3 mm
- Colors: gray, black, white, clear on request
- Core: closed-cell acrylic foam
- Adhesive: high-bond acrylic PSA
- Liner: red PE film or release paper
- Format: slit rolls, strips, pads, kiss-cut and die-cut parts
