No products were found matching your selection.

Other Related Products

  • Semi Closed Cell EPDM Foam

    • Thickness: 3 mm-30 mm typical range for strips, rolls, and sheets
    • Density: 80-130 kg/m3 for soft compression and recovery
    • Color: black, grey, or project-specific color options
    • Material: semi-closed cell EPDM sponge for controlled sealing
    • Backing: plain foam or PSA laminated foam with release liner
    • Use: automotive HVAC, access panels, air ducts, and converted foam strips
    Read moreDone

  • EPDM Closed Cell Foam

    •  Material: closed-cell EPDM sponge rubber
    •  Color: black, with custom color on request
    •  Thickness: 1 mm-50 mm typical
    •  Density grades: soft, medium, firm, 80-220 kg/m3 typical
    •  Supply form: roll, EPDM sponge rubber sheet, slit strip, and cut length
    •  Use: air sealing, water sealing, spacing, cushioning, and outdoor protection
    Read moreDone

  • Neoprene EPDM Blend Foam

    • Material: Neoprene/EPDM closed-cell foam blend
    • Color: Black as standard
    • Thickness: 1 mm-40 mm typical range
    • Formats: Sheets, rolls, strips, gaskets, tapes
    • Adhesive: Plain, acrylic PSA, or rubber PSA
    • Use: Indoor and outdoor industrial sealing
    Read moreDone

  • Building Construction Acrylic Foam Tape

    • Thickness: 0.4 mm, 0.8 mm, 1.1 mm, 1.6 mm, 2.0 mm, 2.3 mm
    • Colors: gray, black, white, clear on request
    • Core: closed-cell acrylic foam
    • Adhesive: high-bond acrylic PSA
    • Liner: red PE film or release paper
    • Format: slit rolls, strips, pads, kiss-cut and die-cut parts
    Read moreDone

  • Artificial Grass Tape And Adhesive

    • Common width: 15 cm, 20 cm, 25 cm, 30 cm, or custom
    • Roll length: 5 m, 10 m, 20 m, 50 m, 100 m, 300 m, or custom
    • Color: green backing, white liner, or project-based option
    • Backing material: non-woven fabric, PP cloth, PET film, or composite backing
    • Adhesive option: hot melt, acrylic, or used with turf adhesive glue
    • Type: single-sided, double-sided, self adhesive, or glue-applied system
    Read moreDone

  • EPDM Sponge Rubber Gaskets

    • Typical format: die-cut frame, pad, cover, and enclosure gasket parts
    • Thickness: 1 mm to 25 mm, matched to gap and compression target
    • Material: closed cell EPDM sponge rubber
    • Color: black standard, other colors reviewed by requirement
    • Backing: plain, PSA backed, or kiss-cut on release liner
    • Drawing details: outer size, inner opening, bolt holes, radius, and wall width
    Read moreDone

  • BBQ Heat Sealing Tape

    • Common Width: 10 mm, 15 mm, 20 mm, 25 mm
    • Common Thickness: 3 mm, 4 mm, 5 mm, 6 mm
    • Color: Black
    • Base Material: Fiber, felt, foam, or fiberglass
    • Backing: Self adhesive liner
    • Use Area: BBQ lid, door, and body edge
    Read moreDone

  • PET Heat Resistant Double Sided Tape

    • Material: PET film carrier with double-coated acrylic adhesive
    • Color: Transparent tape with red, yellow, or clear release liner
    • Thickness: 0.05 mm, 0.10 mm, 0.125 mm, 0.20 mm
    • Width: 3 mm-1240 mm slit rolls available
    • Length: 50 m, 100 m, or jumbo roll format
    • Processing: Slitting, die cutting, kiss cutting, sheet cutting
    Read moreDone

  • EPDM Open Cell Foam – Versatile and Customizable Foam Solutions

    • Material: EPDM Open Cell Foam (Flexible, Lightweight, and Insulating)
    • Thickness: Available from 1/8 inch to 2 inches
    • Color Options: Typically Black, with custom colors available
    • Density: Customizable for specific application requirements (Low to Medium Density)
    • Shape: Supplied in sheets, rolls, or custom-cut pieces for precise application
    • Temperature Range: -40°C to +120°C, ideal for both cold and hot environments
    Read moreDone