No products were found matching your selection.

Other Related Products

  • EPDM Foam Adhesive Tape

    • Common size: 1 mm-20 mm thickness, custom slit width
    • Color: black EPDM foam, liner color optional
    • Material: closed cell EPDM foam carrier
    • Adhesive: single-sided or double-sided PSA
    • Liner: kraft paper, PE-coated paper, or film liner
    • Use: sealing, cushioning, bonding, gasket converting
    Read moreDone

  • Closed Cell EPDM Sponge Rubber

    • Material: closed-cell EPDM sponge rubber
    • Color: black standard, color review available
    • Formats: sheet, roll, block, slit strip
    • Thickness: 1 mm-50 mm typical range
    • Density: soft, medium, firm options
    • Finish: plain or adhesive-backed surface
    Read moreDone
  • double sided tissue tape 24mmdouble sided tissue tape uses

    Tissue double sided tape

    • Common thickness: 70um-160um
    • Carrier: lightweight tissue paper
    • Adhesive: acrylic, hot melt, or rubber PSA
    • Color: translucent tape with white or yellow liner
    • Formats: jumbo roll, log roll, slit roll, die-cut parts
    • Use: paper, plastic film, foam, label bonding
    Read moreDone

  • Custom EPDM Foam Gaskets

    • Material: closed-cell EPDM foam or sponge rubber
    • Color: black standard, grey optional
    • Thickness: 1 mm to 25 mm typical
    • Shapes: frames, rings, washers, strips, and irregular gaskets
    • Adhesive: plain, single-sided PSA, or double-sided PSA
    • Delivery: loose pieces, sheeted parts, or kiss-cut rolls
    Read moreDone

  • EPDM Composite Sponge Door Seal Strip

    • Material: EPDM sponge sealing bulb with solid EPDM support section
    • Color: Black, with other colors available by production request
    • Profile types: Hollow bulb, side bulb, top bulb, U-channel edge seal
    • Grip range: Common 1-5 mm flange or door-edge range
    • Compression guide: 25-40% bulb compression after door closing
    • Supply form: Coils, straight cut lengths, joined frames, sample profiles
    Read moreDone

  • PE Foam Adhesive Tape

    • Material: PE foam carrier with acrylic or rubber PSA
    • Structure: Single-sided or double-sided adhesive coating
    • Thickness: 5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
    • Color: White, black, grey, or project-based color
    • Liner: Paper liner or PE film liner for converting
    • Use: Cushioning, spacing, light sealing, fixing, and die-cut parts
    Read moreDone

  • Artificial Grass Tape And Adhesive

    • Common width: 15 cm, 20 cm, 25 cm, 30 cm, or custom
    • Roll length: 5 m, 10 m, 20 m, 50 m, 100 m, 300 m, or custom
    • Color: green backing, white liner, or project-based option
    • Backing material: non-woven fabric, PP cloth, PET film, or composite backing
    • Adhesive option: hot melt, acrylic, or used with turf adhesive glue
    • Type: single-sided, double-sided, self adhesive, or glue-applied system
    Read moreDone

  • EPDM Sponge Rubber Properties and Technical Data

    EPDM sponge rubber properties should be read with the material grade and test condition. This reference covers closed-cell EPDM sponge for sealing, cushioning, gasket conversion, and PSA-backed constructions. It focuses on density, compression behavior, water absorption, mechanical response, service temperature, and ozone resistance. Use typical data for technical screening; confirm critical values on the intended grade, surface, load, and environment before full use or project approval.

    Read moreDone

  • Building Construction Acrylic Foam Tape

    • Thickness: 0.4 mm, 0.8 mm, 1.1 mm, 1.6 mm, 2.0 mm, 2.3 mm
    • Colors: gray, black, white, clear on request
    • Core: closed-cell acrylic foam
    • Adhesive: high-bond acrylic PSA
    • Liner: red PE film or release paper
    • Format: slit rolls, strips, pads, kiss-cut and die-cut parts
    Read moreDone