No products were found matching your selection.
Other Related Products
-


- Material: PE foam carrier with acrylic or rubber PSA
- Structure: Single-sided or double-sided adhesive coating
- Thickness: 5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Color: White, black, grey, or project-based color
- Liner: Paper liner or PE film liner for converting
- Use: Cushioning, spacing, light sealing, fixing, and die-cut parts
-


- Material: closed-cell EPDM sponge rubber
- Color: black standard, color review available
- Formats: sheet, roll, block, slit strip
- Thickness: 1 mm-50 mm typical range
- Density: soft, medium, firm options
- Finish: plain or adhesive-backed surface
-


- Material: closed-cell EPDM sponge rubber
- Color: black, with custom color on request
- Thickness: 1 mm-50 mm typical
- Density grades: soft, medium, firm, 80-220 kg/m3 typical
- Supply form: roll, EPDM sponge rubber sheet, slit strip, and cut length
- Use: air sealing, water sealing, spacing, cushioning, and outdoor protection
-


- Material: Closed cell neoprene sponge rubber
- Adhesive: Single-side acrylic PSA
- Color: Black as standard
- Thickness: 1.5-25 mm typical range
- Width: Slit rolls from 6 mm and above
- Liner: Paper or film release liner
-


- Common Size: 24 mm, 36 mm, 48 mm, 72 mm, custom slit width
- Color: White adhesive with white or yellow release liner
- Structure: Double coated pressure-sensitive adhesive tape
- Adhesive Type: Rubber-based or hot melt adhesive options
- Thickness Options: Typical 260-400 um total thickness
- Applications: Carpet, mat, exhibition carpet, temporary flooring fixation
-


- Common thickness: 0.8 mm-6.4 mm or custom
- Common width: 6 mm-25 mm slit rolls
- Color options: Black, white, grey
- Foam options: PE foam or PVC foam
- Adhesive: Double sided acrylic PSA
- Use: Window and door glazing assembly
-


- Material: EPDM Open Cell Foam (Flexible, Lightweight, and Insulating)
- Thickness: Available from 1/8 inch to 2 inches
- Color Options: Typically Black, with custom colors available
- Density: Customizable for specific application requirements (Low to Medium Density)
- Shape: Supplied in sheets, rolls, or custom-cut pieces for precise application
- Temperature Range: -40°C to +120°C, ideal for both cold and hot environments
-


- Typical format: die-cut frame, pad, cover, and enclosure gasket parts
- Thickness: 1 mm to 25 mm, matched to gap and compression target
- Material: closed cell EPDM sponge rubber
- Color: black standard, other colors reviewed by requirement
- Backing: plain, PSA backed, or kiss-cut on release liner
- Drawing details: outer size, inner opening, bolt holes, radius, and wall width
-


- Material: PE foam or EVA foam with double side adhesive coating
- Colors: white, black, grey, or production color by request
- Thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Jumbo width: 1030 mm, 1040 mm, or 1200 mm typical
- Adhesive: solvent acrylic, hot melt, or water-based acrylic
- Format: jumbo roll, master roll, log roll, slit roll, or trial roll