No products were found matching your selection.

Other Related Products

  • Double Sided Opp Tape Jumbo Roll

    • Material:Transparent OPP film carrier
    • Adhesive:Double-sided pressure-sensitive adhesive
    • Liner:White or yellow release paper liner
    • Thickness:80um, 90um, 100um, 120um options
    • Roll Form:Wide jumbo roll for rewinding and slitting
    • Use:Packaging, labels, and thin film lamination
    Read moreDone

  • Closed Cell EPDM Sponge Rubber

    • Material: closed-cell EPDM sponge rubber
    • Color: black standard, color review available
    • Formats: sheet, roll, block, slit strip
    • Thickness: 1 mm-50 mm typical range
    • Density: soft, medium, firm options
    • Finish: plain or adhesive-backed surface
    Read moreDone

  • EPDM Sponge Rubber Properties and Technical Data

    EPDM sponge rubber properties should be read with the material grade and test condition. This reference covers closed-cell EPDM sponge for sealing, cushioning, gasket conversion, and PSA-backed constructions. It focuses on density, compression behavior, water absorption, mechanical response, service temperature, and ozone resistance. Use typical data for technical screening; confirm critical values on the intended grade, surface, load, and environment before full use or project approval.

    Read moreDone

  • Artificial Grass Tape And Adhesive

    • Common width: 15 cm, 20 cm, 25 cm, 30 cm, or custom
    • Roll length: 5 m, 10 m, 20 m, 50 m, 100 m, 300 m, or custom
    • Color: green backing, white liner, or project-based option
    • Backing material: non-woven fabric, PP cloth, PET film, or composite backing
    • Adhesive option: hot melt, acrylic, or used with turf adhesive glue
    • Type: single-sided, double-sided, self adhesive, or glue-applied system
    Read moreDone

  • PET Heat Resistant Double Sided Tape

    • Material: PET film carrier with double-coated acrylic adhesive
    • Color: Transparent tape with red, yellow, or clear release liner
    • Thickness: 0.05 mm, 0.10 mm, 0.125 mm, 0.20 mm
    • Width: 3 mm-1240 mm slit rolls available
    • Length: 50 m, 100 m, or jumbo roll format
    • Processing: Slitting, die cutting, kiss cutting, sheet cutting
    Read moreDone

  • BBQ Heat Sealing Tape

    • Common Width: 10 mm, 15 mm, 20 mm, 25 mm
    • Common Thickness: 3 mm, 4 mm, 5 mm, 6 mm
    • Color: Black
    • Base Material: Fiber, felt, foam, or fiberglass
    • Backing: Self adhesive liner
    • Use Area: BBQ lid, door, and body edge
    Read moreDone

  • Building Construction Acrylic Foam Tape

    • Thickness: 0.4 mm, 0.8 mm, 1.1 mm, 1.6 mm, 2.0 mm, 2.3 mm
    • Colors: gray, black, white, clear on request
    • Core: closed-cell acrylic foam
    • Adhesive: high-bond acrylic PSA
    • Liner: red PE film or release paper
    • Format: slit rolls, strips, pads, kiss-cut and die-cut parts
    Read moreDone

  • Adhesive Sponge Rubber Neoprene Tape

    • Material: Closed cell neoprene sponge rubber
    • Adhesive: Single-side acrylic PSA
    • Color: Black as standard
    • Thickness: 1.5-25 mm typical range
    • Width: Slit rolls from 6 mm and above
    • Liner: Paper or film release liner
    Read moreDone

  • EPDM Sponge Rubber Gaskets

    • Typical format: die-cut frame, pad, cover, and enclosure gasket parts
    • Thickness: 1 mm to 25 mm, matched to gap and compression target
    • Material: closed cell EPDM sponge rubber
    • Color: black standard, other colors reviewed by requirement
    • Backing: plain, PSA backed, or kiss-cut on release liner
    • Drawing details: outer size, inner opening, bolt holes, radius, and wall width
    Read moreDone