No products were found matching your selection.

Other Related Products

  • Custom EPDM Foam Gaskets

    • Material: closed-cell EPDM foam or sponge rubber
    • Color: black standard, grey optional
    • Thickness: 1 mm to 25 mm typical
    • Shapes: frames, rings, washers, strips, and irregular gaskets
    • Adhesive: plain, single-sided PSA, or double-sided PSA
    • Delivery: loose pieces, sheeted parts, or kiss-cut rolls
    Read moreDone

  • Artificial Grass Tape And Adhesive

    • Common width: 15 cm, 20 cm, 25 cm, 30 cm, or custom
    • Roll length: 5 m, 10 m, 20 m, 50 m, 100 m, 300 m, or custom
    • Color: green backing, white liner, or project-based option
    • Backing material: non-woven fabric, PP cloth, PET film, or composite backing
    • Adhesive option: hot melt, acrylic, or used with turf adhesive glue
    • Type: single-sided, double-sided, self adhesive, or glue-applied system
    Read moreDone

  • Single Sided EVA Foam Tape

    • Material: Closed-cell EVA foam backing
    • Adhesive: Hot melt or acrylic adhesive
    • Structure: One adhesive side, one exposed foam side
    • Thickness: 1 mm – 10 mm typical range
    • Liner: Release paper or release film
    • Format: Rolls, strips, sheets, or die-cut pads
    Read moreDone

  • Double Sided Opp Tape Jumbo Roll

    • Material:Transparent OPP film carrier
    • Adhesive:Double-sided pressure-sensitive adhesive
    • Liner:White or yellow release paper liner
    • Thickness:80um, 90um, 100um, 120um options
    • Roll Form:Wide jumbo roll for rewinding and slitting
    • Use:Packaging, labels, and thin film lamination
    Read moreDone

  • EPDM Sponge Rubber Gaskets

    • Typical format: die-cut frame, pad, cover, and enclosure gasket parts
    • Thickness: 1 mm to 25 mm, matched to gap and compression target
    • Material: closed cell EPDM sponge rubber
    • Color: black standard, other colors reviewed by requirement
    • Backing: plain, PSA backed, or kiss-cut on release liner
    • Drawing details: outer size, inner opening, bolt holes, radius, and wall width
    Read moreDone

  • Firm Grade EPDM Sponge

    • Material: Firm-grade closed-cell EPDM sponge
    • Color: Black as standard
    • Density: 180-220 kg/m3 typical reference
    • Thickness: 2mm-50mm sheet and roll options
    • Format: Sheet, roll, slit strip, die-cut pad
    • Backing: Plain or adhesive-backed for positioning
    Read moreDone

  • Closed Cell EPDM Sponge Rubber

    • Material: closed-cell EPDM sponge rubber
    • Color: black standard, color review available
    • Formats: sheet, roll, block, slit strip
    • Thickness: 1 mm-50 mm typical range
    • Density: soft, medium, firm options
    • Finish: plain or adhesive-backed surface
    Read moreDone

  • EPDM Sponge Adhesive Seal

    • Common thickness: 2 mm to 15 mm
    • Standard color: black EPDM sponge
    • Material: closed cell EPDM sponge rubber
    • Backing: one-side pressure sensitive adhesive
    • Liner: paper or film release liner
    • Supply form: rolls, strips, custom slit widths
    Read moreDone

  • Open Cell Polyurethane Foam Tape

    • Common thickness: 2 mm, 3 mm, 5 mm, 6 mm, 10 mm, 12 mm
    • Color: Black, grey, charcoal grey, or white
    • Material: Low-density open-cell polyurethane foam, 24-48 kg/m3 typical
    • Adhesive: Single-side acrylic PSA, 40-70 um typical
    • Liner: Paper or film release liner, 80-120 um typical
    • Use: Compression sealing, cushioning, dust sealing, and die-cut gaskets
    Read moreDone