No products were found matching your selection.
Other Related Products
-
- Thickness: 3 mm-30 mm typical range for strips, rolls, and sheets
- Density: 80-130 kg/m3 for soft compression and recovery
- Color: black, grey, or project-specific color options
- Material: semi-closed cell EPDM sponge for controlled sealing
- Backing: plain foam or PSA laminated foam with release liner
- Use: automotive HVAC, access panels, air ducts, and converted foam strips
-
Double sided tape for automotive applications helps attach trim, emblems, interior parts, foam seals and anti-rattle pads without visible screws or liquid adhesive overflow. The right tape should be selected by substrate type, coating condition, bond-line thickness, adhesive chemistry, compression need, application pressure, dwell time, service temperature and load direction. Common risks include trim edge lifting, weak wet-out on textured plastic, foam compression set, difficult liner removal and adhesive transfer during rework. Final selection should be based on real-substrate sample testing and a trial run before repeated assembly.
-
- Common thickness: 2 mm, 3 mm, 5 mm, 6 mm, 10 mm, 12 mm
- Color: Black, grey, charcoal grey, or white
- Material: Low-density open-cell polyurethane foam, 24-48 kg/m3 typical
- Adhesive: Single-side acrylic PSA, 40-70 um typical
- Liner: Paper or film release liner, 80-120 um typical
- Use: Compression sealing, cushioning, dust sealing, and die-cut gaskets
-
- Typical format: die-cut frame, pad, cover, and enclosure gasket parts
- Thickness: 1 mm to 25 mm, matched to gap and compression target
- Material: closed cell EPDM sponge rubber
- Color: black standard, other colors reviewed by requirement
- Backing: plain, PSA backed, or kiss-cut on release liner
- Drawing details: outer size, inner opening, bolt holes, radius, and wall width
-
EPDM sponge rubber properties should be read with the material grade and test condition. This reference covers closed-cell EPDM sponge for sealing, cushioning, gasket conversion, and PSA-backed constructions. It focuses on density, compression behavior, water absorption, mechanical response, service temperature, and ozone resistance. Use typical data for technical screening; confirm critical values on the intended grade, surface, load, and environment before full use or project approval.
-
- Thickness: 0.4 mm, 0.8 mm, 1.1 mm, 1.6 mm, 2.0 mm, 2.3 mm
- Colors: gray, black, white, clear on request
- Core: closed-cell acrylic foam
- Adhesive: high-bond acrylic PSA
- Liner: red PE film or release paper
- Format: slit rolls, strips, pads, kiss-cut and die-cut parts
-
- Common width: 15 cm, 20 cm, 25 cm, 30 cm, or custom
- Roll length: 5 m, 10 m, 20 m, 50 m, 100 m, 300 m, or custom
- Color: green backing, white liner, or project-based option
- Backing material: non-woven fabric, PP cloth, PET film, or composite backing
- Adhesive option: hot melt, acrylic, or used with turf adhesive glue
- Type: single-sided, double-sided, self adhesive, or glue-applied system
-
- Common size: 1 mm-20 mm thickness, custom slit width
- Color: black EPDM foam, liner color optional
- Material: closed cell EPDM foam carrier
- Adhesive: single-sided or double-sided PSA
- Liner: kraft paper, PE-coated paper, or film liner
- Use: sealing, cushioning, bonding, gasket converting
-
- Material: closed-cell EPDM sponge rubber
- Color: black, with custom color on request
- Thickness: 1 mm-50 mm typical
- Density grades: soft, medium, firm, 80-220 kg/m3 typical
- Supply form: roll, EPDM sponge rubber sheet, slit strip, and cut length
- Use: air sealing, water sealing, spacing, cushioning, and outdoor protection
