No products were found matching your selection.

Other Related Products

  • EPDM Sponge Adhesive Seal

    • Common thickness: 2 mm to 15 mm
    • Standard color: black EPDM sponge
    • Material: closed cell EPDM sponge rubber
    • Backing: one-side pressure sensitive adhesive
    • Liner: paper or film release liner
    • Supply form: rolls, strips, custom slit widths
    Read moreDone

  • Closed Cell Foam Gasket Tape

    •  Material: closed cell PVC, PE, EPDM, or neoprene blend foam
    •  Structure: single sided PSA with paper or film release liner
    •  Thickness: 1 mm-12 mm, with custom thickness available
    •  Roll width: 5 mm-1000 mm slit rolls or master rolls
    •  Colors: black, gray, white, or custom color by grade
    •  Uses: enclosure, HVAC, cabinet, and equipment panel sealing
    Read moreDone

  • EPDM Sponge Rubber Extrusions

    • Size: custom profile width 5-80 mm, larger sections by tooling
    • Color: black standard, other colors by compound review
    • Material: EPDM sponge rubber, closed-cell or semi-closed structure
    • Shape: D, P, E, O, U-channel, hollow bulb, solid strip
    • Surface: extruded skin surface, optional PSA backing or punched holes
    • Use: door seals, cabinet seals, vehicle seals, equipment covers
    Read moreDone

  • Hot Melt Foam Tape

    • Material:PE, EVA, or IXPE foam carrier
    • Adhesive:Hot melt PSA coating
    • Structure:Single sided or double sided foam tape
    • Color:White, black, grey, or custom color
    • Thickness:Common 0.5mm to 5mm options
    • Surface:Plastic, metal, painted panel, ABS, PP, acrylic
    Read moreDone

  • EPDM Sponge Rubber Gaskets

    • Typical format: die-cut frame, pad, cover, and enclosure gasket parts
    • Thickness: 1 mm to 25 mm, matched to gap and compression target
    • Material: closed cell EPDM sponge rubber
    • Color: black standard, other colors reviewed by requirement
    • Backing: plain, PSA backed, or kiss-cut on release liner
    • Drawing details: outer size, inner opening, bolt holes, radius, and wall width
    Read moreDone

  • Single Sided EVA Foam Tape

    • Material: Closed-cell EVA foam backing
    • Adhesive: Hot melt or acrylic adhesive
    • Structure: One adhesive side, one exposed foam side
    • Thickness: 1 mm – 10 mm typical range
    • Liner: Release paper or release film
    • Format: Rolls, strips, sheets, or die-cut pads
    Read moreDone

  • BBQ Heat Sealing Tape

    • Common Width: 10 mm, 15 mm, 20 mm, 25 mm
    • Common Thickness: 3 mm, 4 mm, 5 mm, 6 mm
    • Color: Black
    • Base Material: Fiber, felt, foam, or fiberglass
    • Backing: Self adhesive liner
    • Use Area: BBQ lid, door, and body edge
    Read moreDone

  • PE Foam Adhesive Tape

    • Material: PE foam carrier with acrylic or rubber PSA
    • Structure: Single-sided or double-sided adhesive coating
    • Thickness: 5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
    • Color: White, black, grey, or project-based color
    • Liner: Paper liner or PE film liner for converting
    • Use: Cushioning, spacing, light sealing, fixing, and die-cut parts
    Read moreDone

  • Automotive Double-Sided Tape Solutions for Trim Attachment, Sealing and Interior Assembly

    Double sided tape for automotive applications helps attach trim, emblems, interior parts, foam seals and anti-rattle pads without visible screws or liquid adhesive overflow. The right tape should be selected by substrate type, coating condition, bond-line thickness, adhesive chemistry, compression need, application pressure, dwell time, service temperature and load direction. Common risks include trim edge lifting, weak wet-out on textured plastic, foam compression set, difficult liner removal and adhesive transfer during rework. Final selection should be based on real-substrate sample testing and a trial run before repeated assembly.

    Read moreDone