No products were found matching your selection.
Other Related Products
-
- Common width: 15 cm, 20 cm, 25 cm, 30 cm, or custom
- Roll length: 5 m, 10 m, 20 m, 50 m, 100 m, 300 m, or custom
- Color: green backing, white liner, or project-based option
- Backing material: non-woven fabric, PP cloth, PET film, or composite backing
- Adhesive option: hot melt, acrylic, or used with turf adhesive glue
- Type: single-sided, double-sided, self adhesive, or glue-applied system
-
EPDM sponge rubber properties should be read with the material grade and test condition. This reference covers closed-cell EPDM sponge for sealing, cushioning, gasket conversion, and PSA-backed constructions. It focuses on density, compression behavior, water absorption, mechanical response, service temperature, and ozone resistance. Use typical data for technical screening; confirm critical values on the intended grade, surface, load, and environment before full use or project approval.
-
- Material: EPDM Open Cell Foam (Flexible, Lightweight, and Insulating)
- Thickness: Available from 1/8 inch to 2 inches
- Color Options: Typically Black, with custom colors available
- Density: Customizable for specific application requirements (Low to Medium Density)
- Shape: Supplied in sheets, rolls, or custom-cut pieces for precise application
- Temperature Range: -40°C to +120°C, ideal for both cold and hot environments
-
- Common thickness: 0.8 mm-6.4 mm or custom
- Common width: 6 mm-25 mm slit rolls
- Color options: Black, white, grey
- Foam options: PE foam or PVC foam
- Adhesive: Double sided acrylic PSA
- Use: Window and door glazing assembly
-
- Material: Closed cell neoprene sponge rubber
- Adhesive: Single-side acrylic PSA
- Color: Black as standard
- Thickness: 1.5-25 mm typical range
- Width: Slit rolls from 6 mm and above
- Liner: Paper or film release liner
-
- Size: 10 mm x 100 mm pre-cut strips, convenient for bulk pre-cut packs
- Material: Transparent PET film with skin-safe adhesive
- Color: Clear, nearly invisible on all fabrics (clear strip)
- Hold: Temporary with low residue, safe for delicate fabrics
- Packaging: Available in bulk packs or private label options
- Compatibility: Ideal for collars, cuffs, hemlines, and small button gaps; tested for up to 5 clean repositionings
-
- Material: NBR/PVC foam gasket tape
- Color: Black
- Structure: Closed-cell rubber foam
- Adhesive: Single-sided PSA backing
- Liner: Paper or film release liner
- Formats: Rolls, strips, die-cut parts
-
- Typical format: die-cut frame, pad, cover, and enclosure gasket parts
- Thickness: 1 mm to 25 mm, matched to gap and compression target
- Material: closed cell EPDM sponge rubber
- Color: black standard, other colors reviewed by requirement
- Backing: plain, PSA backed, or kiss-cut on release liner
- Drawing details: outer size, inner opening, bolt holes, radius, and wall width
-
This double sided tape data sheet explains how construction, thickness, peel adhesion, tack, static shear, temperature and storage data should be interpreted together. It applies to carrier-based and foam-supported pressure-sensitive double-sided tapes used on metal, glass, plastics and coated surfaces. Typical values are reference data rather than universal claims. Surface condition, application pressure, dwell, environment and load can change results, so the selected grade should be confirmed on representative samples before production release.
