No products were found matching your selection.

Other Related Products

  • EPDM Sponge Rubber Extrusions

    • Size: custom profile width 5-80 mm, larger sections by tooling
    • Color: black standard, other colors by compound review
    • Material: EPDM sponge rubber, closed-cell or semi-closed structure
    • Shape: D, P, E, O, U-channel, hollow bulb, solid strip
    • Surface: extruded skin surface, optional PSA backing or punched holes
    • Use: door seals, cabinet seals, vehicle seals, equipment covers
    Read moreDone

  • PET Heat Resistant Double Sided Tape

    • Material: PET film carrier with double-coated acrylic adhesive
    • Color: Transparent tape with red, yellow, or clear release liner
    • Thickness: 0.05 mm, 0.10 mm, 0.125 mm, 0.20 mm
    • Width: 3 mm-1240 mm slit rolls available
    • Length: 50 m, 100 m, or jumbo roll format
    • Processing: Slitting, die cutting, kiss cutting, sheet cutting
    Read moreDone

  • Single Sided EVA Foam Tape

    • Material: Closed-cell EVA foam backing
    • Adhesive: Hot melt or acrylic adhesive
    • Structure: One adhesive side, one exposed foam side
    • Thickness: 1 mm – 10 mm typical range
    • Liner: Release paper or release film
    • Format: Rolls, strips, sheets, or die-cut pads
    Read moreDone

  • Open Cell Polyurethane Foam Tape

    • Common thickness: 2 mm, 3 mm, 5 mm, 6 mm, 10 mm, 12 mm
    • Color: Black, grey, charcoal grey, or white
    • Material: Low-density open-cell polyurethane foam, 24-48 kg/m3 typical
    • Adhesive: Single-side acrylic PSA, 40-70 um typical
    • Liner: Paper or film release liner, 80-120 um typical
    • Use: Compression sealing, cushioning, dust sealing, and die-cut gaskets
    Read moreDone

  • EPDM Sponge Adhesive Seal

    • Common thickness: 2 mm to 15 mm
    • Standard color: black EPDM sponge
    • Material: closed cell EPDM sponge rubber
    • Backing: one-side pressure sensitive adhesive
    • Liner: paper or film release liner
    • Supply form: rolls, strips, custom slit widths
    Read moreDone

  • EPDM Sponge Rubber Gaskets

    • Typical format: die-cut frame, pad, cover, and enclosure gasket parts
    • Thickness: 1 mm to 25 mm, matched to gap and compression target
    • Material: closed cell EPDM sponge rubber
    • Color: black standard, other colors reviewed by requirement
    • Backing: plain, PSA backed, or kiss-cut on release liner
    • Drawing details: outer size, inner opening, bolt holes, radius, and wall width
    Read moreDone

  • Automotive Double-Sided Tape Solutions for Trim Attachment, Sealing and Interior Assembly

    Double sided tape for automotive applications helps attach trim, emblems, interior parts, foam seals and anti-rattle pads without visible screws or liquid adhesive overflow. The right tape should be selected by substrate type, coating condition, bond-line thickness, adhesive chemistry, compression need, application pressure, dwell time, service temperature and load direction. Common risks include trim edge lifting, weak wet-out on textured plastic, foam compression set, difficult liner removal and adhesive transfer during rework. Final selection should be based on real-substrate sample testing and a trial run before repeated assembly.

    Read moreDone

  • Hot Melt Foam Tape

    • Material:PE, EVA, or IXPE foam carrier
    • Adhesive:Hot melt PSA coating
    • Structure:Single sided or double sided foam tape
    • Color:White, black, grey, or custom color
    • Thickness:Common 0.5mm to 5mm options
    • Surface:Plastic, metal, painted panel, ABS, PP, acrylic
    Read moreDone

  • Semi Closed Cell EPDM Foam

    • Thickness: 3 mm-30 mm typical range for strips, rolls, and sheets
    • Density: 80-130 kg/m3 for soft compression and recovery
    • Color: black, grey, or project-specific color options
    • Material: semi-closed cell EPDM sponge for controlled sealing
    • Backing: plain foam or PSA laminated foam with release liner
    • Use: automotive HVAC, access panels, air ducts, and converted foam strips
    Read moreDone