No products were found matching your selection.
Other Related Products
-
- Material: PET film carrier with double-coated acrylic adhesive
- Color: Transparent tape with red, yellow, or clear release liner
- Thickness: 0.05 mm, 0.10 mm, 0.125 mm, 0.20 mm
- Width: 3 mm-1240 mm slit rolls available
- Length: 50 m, 100 m, or jumbo roll format
- Processing: Slitting, die cutting, kiss cutting, sheet cutting
-
- Size: 10 mm x 100 mm pre-cut strips, convenient for bulk pre-cut packs
- Material: Transparent PET film with skin-safe adhesive
- Color: Clear, nearly invisible on all fabrics (clear strip)
- Hold: Temporary with low residue, safe for delicate fabrics
- Packaging: Available in bulk packs or private label options
- Compatibility: Ideal for collars, cuffs, hemlines, and small button gaps; tested for up to 5 clean repositionings
-
- Material: Closed cell neoprene sponge rubber
- Adhesive: Single-side acrylic PSA
- Color: Black as standard
- Thickness: 1.5-25 mm typical range
- Width: Slit rolls from 6 mm and above
- Liner: Paper or film release liner
-
- Common thickness: 0.5mm, 1mm, 1.5mm, 2mm
- Color: clear transparent gel body
- Material: acrylic gel adhesive
- Width: custom slit narrow or wide rolls
- Roll length: 3m, 5m, 10m, 20m, 50m, 100m, 300m
- Core option: 38mm or 76mm paper core
-
- Material: closed-cell EPDM foam or sponge rubber
- Color: black standard, grey optional
- Thickness: 1 mm to 25 mm typical
- Shapes: frames, rings, washers, strips, and irregular gaskets
- Adhesive: plain, single-sided PSA, or double-sided PSA
- Delivery: loose pieces, sheeted parts, or kiss-cut rolls
-
- Material: PE foam carrier with acrylic or rubber PSA
- Structure: Single-sided or double-sided adhesive coating
- Thickness: 5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Color: White, black, grey, or project-based color
- Liner: Paper liner or PE film liner for converting
- Use: Cushioning, spacing, light sealing, fixing, and die-cut parts
-
- Typical format: die-cut frame, pad, cover, and enclosure gasket parts
- Thickness: 1 mm to 25 mm, matched to gap and compression target
- Material: closed cell EPDM sponge rubber
- Color: black standard, other colors reviewed by requirement
- Backing: plain, PSA backed, or kiss-cut on release liner
- Drawing details: outer size, inner opening, bolt holes, radius, and wall width
-
Double sided tape for automotive applications helps attach trim, emblems, interior parts, foam seals and anti-rattle pads without visible screws or liquid adhesive overflow. The right tape should be selected by substrate type, coating condition, bond-line thickness, adhesive chemistry, compression need, application pressure, dwell time, service temperature and load direction. Common risks include trim edge lifting, weak wet-out on textured plastic, foam compression set, difficult liner removal and adhesive transfer during rework. Final selection should be based on real-substrate sample testing and a trial run before repeated assembly.
-
- Material: closed cell PVC, PE, EPDM, or neoprene blend foam
- Structure: single sided PSA with paper or film release liner
- Thickness: 1 mm-12 mm, with custom thickness available
- Roll width: 5 mm-1000 mm slit rolls or master rolls
- Colors: black, gray, white, or custom color by grade
- Uses: enclosure, HVAC, cabinet, and equipment panel sealing
