No products were found matching your selection.
Other Related Products
-
- Common Size: 24 mm, 36 mm, 48 mm, 72 mm, custom slit width
- Color: White adhesive with white or yellow release liner
- Structure: Double coated pressure-sensitive adhesive tape
- Adhesive Type: Rubber-based or hot melt adhesive options
- Thickness Options: Typical 260-400 um total thickness
- Applications: Carpet, mat, exhibition carpet, temporary flooring fixation
-
- Common width: 15 cm, 20 cm, 25 cm, 30 cm, or custom
- Roll length: 5 m, 10 m, 20 m, 50 m, 100 m, 300 m, or custom
- Color: green backing, white liner, or project-based option
- Backing material: non-woven fabric, PP cloth, PET film, or composite backing
- Adhesive option: hot melt, acrylic, or used with turf adhesive glue
- Type: single-sided, double-sided, self adhesive, or glue-applied system
-
- Material: Closed-cell EVA foam backing
- Adhesive: Hot melt or acrylic adhesive
- Structure: One adhesive side, one exposed foam side
- Thickness: 1 mm – 10 mm typical range
- Liner: Release paper or release film
- Format: Rolls, strips, sheets, or die-cut pads
-
- Size: 10 mm x 100 mm pre-cut strips, convenient for bulk pre-cut packs
- Material: Transparent PET film with skin-safe adhesive
- Color: Clear, nearly invisible on all fabrics (clear strip)
- Hold: Temporary with low residue, safe for delicate fabrics
- Packaging: Available in bulk packs or private label options
- Compatibility: Ideal for collars, cuffs, hemlines, and small button gaps; tested for up to 5 clean repositionings
-
- Common Width: 10 mm, 15 mm, 20 mm, 25 mm
- Common Thickness: 3 mm, 4 mm, 5 mm, 6 mm
- Color: Black
- Base Material: Fiber, felt, foam, or fiberglass
- Backing: Self adhesive liner
- Use Area: BBQ lid, door, and body edge
-
- Size: custom profile width 5-80 mm, larger sections by tooling
- Color: black standard, other colors by compound review
- Material: EPDM sponge rubber, closed-cell or semi-closed structure
- Shape: D, P, E, O, U-channel, hollow bulb, solid strip
- Surface: extruded skin surface, optional PSA backing or punched holes
- Use: door seals, cabinet seals, vehicle seals, equipment covers
-
- Material: PET film carrier with double-coated acrylic adhesive
- Color: Transparent tape with red, yellow, or clear release liner
- Thickness: 0.05 mm, 0.10 mm, 0.125 mm, 0.20 mm
- Width: 3 mm-1240 mm slit rolls available
- Length: 50 m, 100 m, or jumbo roll format
- Processing: Slitting, die cutting, kiss cutting, sheet cutting
-
EPDM sponge rubber properties should be read with the material grade and test condition. This reference covers closed-cell EPDM sponge for sealing, cushioning, gasket conversion, and PSA-backed constructions. It focuses on density, compression behavior, water absorption, mechanical response, service temperature, and ozone resistance. Use typical data for technical screening; confirm critical values on the intended grade, surface, load, and environment before full use or project approval.
