No products were found matching your selection.
Other Related Products
-
- Material: Neoprene/EPDM closed-cell foam blend
- Color: Black as standard
- Thickness: 1 mm-40 mm typical range
- Formats: Sheets, rolls, strips, gaskets, tapes
- Adhesive: Plain, acrylic PSA, or rubber PSA
- Use: Indoor and outdoor industrial sealing
-
- Material: closed-cell EPDM sponge rubber
- Color: black, with custom color on request
- Thickness: 1 mm-50 mm typical
- Density grades: soft, medium, firm, 80-220 kg/m3 typical
- Supply form: roll, EPDM sponge rubber sheet, slit strip, and cut length
- Use: air sealing, water sealing, spacing, cushioning, and outdoor protection
-
- Material: PE foam carrier with acrylic or rubber PSA
- Structure: Single-sided or double-sided adhesive coating
- Thickness: 5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Color: White, black, grey, or project-based color
- Liner: Paper liner or PE film liner for converting
- Use: Cushioning, spacing, light sealing, fixing, and die-cut parts
-
Double sided tape for automotive applications helps attach trim, emblems, interior parts, foam seals and anti-rattle pads without visible screws or liquid adhesive overflow. The right tape should be selected by substrate type, coating condition, bond-line thickness, adhesive chemistry, compression need, application pressure, dwell time, service temperature and load direction. Common risks include trim edge lifting, weak wet-out on textured plastic, foam compression set, difficult liner removal and adhesive transfer during rework. Final selection should be based on real-substrate sample testing and a trial run before repeated assembly.
-
- Common thickness: 70um-160um
- Carrier: lightweight tissue paper
- Adhesive: acrylic, hot melt, or rubber PSA
- Color: translucent tape with white or yellow liner
- Formats: jumbo roll, log roll, slit roll, die-cut parts
- Use: paper, plastic film, foam, label bonding
-
- Material: Closed cell neoprene sponge rubber
- Adhesive: Single-side acrylic PSA
- Color: Black as standard
- Thickness: 1.5-25 mm typical range
- Width: Slit rolls from 6 mm and above
- Liner: Paper or film release liner
-
- Material: EPDM sponge sealing bulb with solid EPDM support section
- Color: Black, with other colors available by production request
- Profile types: Hollow bulb, side bulb, top bulb, U-channel edge seal
- Grip range: Common 1-5 mm flange or door-edge range
- Compression guide: 25-40% bulb compression after door closing
- Supply form: Coils, straight cut lengths, joined frames, sample profiles
-
- Common widths: 6 mm to 1240 mm slit rolls
- Thickness options: 0.10 mm to 1.50 mm typical
- Adhesive: Double-sided acrylic PSA coating
- Liner: Red PE release liner, 60-100 um typical
- Tape body: Clear or translucent, not red adhesive body
- Use: Metal, glass, plastic, panel, nameplate, trim bonding
