No products were found matching your selection.

Other Related Products

  • Automotive Double-Sided Tape Solutions for Trim Attachment, Sealing and Interior Assembly

    Double sided tape for automotive applications helps attach trim, emblems, interior parts, foam seals and anti-rattle pads without visible screws or liquid adhesive overflow. The right tape should be selected by substrate type, coating condition, bond-line thickness, adhesive chemistry, compression need, application pressure, dwell time, service temperature and load direction. Common risks include trim edge lifting, weak wet-out on textured plastic, foam compression set, difficult liner removal and adhesive transfer during rework. Final selection should be based on real-substrate sample testing and a trial run before repeated assembly.

    Read moreDone

  • EPDM Foam Adhesive Tape

    • Common size: 1 mm-20 mm thickness, custom slit width
    • Color: black EPDM foam, liner color optional
    • Material: closed cell EPDM foam carrier
    • Adhesive: single-sided or double-sided PSA
    • Liner: kraft paper, PE-coated paper, or film liner
    • Use: sealing, cushioning, bonding, gasket converting
    Read moreDone

  • Double Sided Foam Tape Jumbo Roll

    • Material: PE foam or EVA foam with double side adhesive coating
    • Colors: white, black, grey, or production color by request
    • Thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
    • Jumbo width: 1030 mm, 1040 mm, or 1200 mm typical
    • Adhesive: solvent acrylic, hot melt, or water-based acrylic
    • Format: jumbo roll, master roll, log roll, slit roll, or trial roll
    Read moreDone

  • Neoprene EPDM Blend Foam

    • Material: Neoprene/EPDM closed-cell foam blend
    • Color: Black as standard
    • Thickness: 1 mm-40 mm typical range
    • Formats: Sheets, rolls, strips, gaskets, tapes
    • Adhesive: Plain, acrylic PSA, or rubber PSA
    • Use: Indoor and outdoor industrial sealing
    Read moreDone

  • Custom EPDM Foam Gaskets

    • Material: closed-cell EPDM foam or sponge rubber
    • Color: black standard, grey optional
    • Thickness: 1 mm to 25 mm typical
    • Shapes: frames, rings, washers, strips, and irregular gaskets
    • Adhesive: plain, single-sided PSA, or double-sided PSA
    • Delivery: loose pieces, sheeted parts, or kiss-cut rolls
    Read moreDone

  • Closed Cell EPDM Sponge Rubber

    • Material: closed-cell EPDM sponge rubber
    • Color: black standard, color review available
    • Formats: sheet, roll, block, slit strip
    • Thickness: 1 mm-50 mm typical range
    • Density: soft, medium, firm options
    • Finish: plain or adhesive-backed surface
    Read moreDone

  • Building Construction Acrylic Foam Tape

    • Thickness: 0.4 mm, 0.8 mm, 1.1 mm, 1.6 mm, 2.0 mm, 2.3 mm
    • Colors: gray, black, white, clear on request
    • Core: closed-cell acrylic foam
    • Adhesive: high-bond acrylic PSA
    • Liner: red PE film or release paper
    • Format: slit rolls, strips, pads, kiss-cut and die-cut parts
    Read moreDone

  • Double Sided Acrylic Adhesive Tape

    • Common widths: 6 mm to 1240 mm slit rolls
    • Thickness options: 0.10 mm to 1.50 mm typical
    • Adhesive: Double-sided acrylic PSA coating
    • Liner: Red PE release liner, 60-100 um typical
    • Tape body: Clear or translucent, not red adhesive body
    • Use: Metal, glass, plastic, panel, nameplate, trim bonding
    Read moreDone

  • Single Sided EVA Foam Tape

    • Material: Closed-cell EVA foam backing
    • Adhesive: Hot melt or acrylic adhesive
    • Structure: One adhesive side, one exposed foam side
    • Thickness: 1 mm – 10 mm typical range
    • Liner: Release paper or release film
    • Format: Rolls, strips, sheets, or die-cut pads
    Read moreDone