No products were found matching your selection.
Other Related Products
-


- Common thickness: 0.8 mm-6.4 mm or custom
- Common width: 6 mm-25 mm slit rolls
- Color options: Black, white, grey
- Foam options: PE foam or PVC foam
- Adhesive: Double sided acrylic PSA
- Use: Window and door glazing assembly
-


- Material: closed-cell EPDM foam or sponge rubber
- Color: black standard, grey optional
- Thickness: 1 mm to 25 mm typical
- Shapes: frames, rings, washers, strips, and irregular gaskets
- Adhesive: plain, single-sided PSA, or double-sided PSA
- Delivery: loose pieces, sheeted parts, or kiss-cut rolls
-


- Material: closed-cell EPDM sponge rubber
- Color: black, with custom color on request
- Thickness: 1 mm-50 mm typical
- Density grades: soft, medium, firm, 80-220 kg/m3 typical
- Supply form: roll, EPDM sponge rubber sheet, slit strip, and cut length
- Use: air sealing, water sealing, spacing, cushioning, and outdoor protection
-


- Material: EPDM Open Cell Foam (Flexible, Lightweight, and Insulating)
- Thickness: Available from 1/8 inch to 2 inches
- Color Options: Typically Black, with custom colors available
- Density: Customizable for specific application requirements (Low to Medium Density)
- Shape: Supplied in sheets, rolls, or custom-cut pieces for precise application
- Temperature Range: -40°C to +120°C, ideal for both cold and hot environments
-


- Common width: 15 cm, 20 cm, 25 cm, 30 cm, or custom
- Roll length: 5 m, 10 m, 20 m, 50 m, 100 m, 300 m, or custom
- Color: green backing, white liner, or project-based option
- Backing material: non-woven fabric, PP cloth, PET film, or composite backing
- Adhesive option: hot melt, acrylic, or used with turf adhesive glue
- Type: single-sided, double-sided, self adhesive, or glue-applied system
-


- Common Size: 24 mm, 36 mm, 48 mm, 72 mm, custom slit width
- Color: White adhesive with white or yellow release liner
- Structure: Double coated pressure-sensitive adhesive tape
- Adhesive Type: Rubber-based or hot melt adhesive options
- Thickness Options: Typical 260-400 um total thickness
- Applications: Carpet, mat, exhibition carpet, temporary flooring fixation
-

Double sided tape for automotive applications helps attach trim, emblems, interior parts, foam seals and anti-rattle pads without visible screws or liquid adhesive overflow. The right tape should be selected by substrate type, coating condition, bond-line thickness, adhesive chemistry, compression need, application pressure, dwell time, service temperature and load direction. Common risks include trim edge lifting, weak wet-out on textured plastic, foam compression set, difficult liner removal and adhesive transfer during rework. Final selection should be based on real-substrate sample testing and a trial run before repeated assembly.
-


- Material: NBR/PVC foam gasket tape
- Color: Black
- Structure: Closed-cell rubber foam
- Adhesive: Single-sided PSA backing
- Liner: Paper or film release liner
- Formats: Rolls, strips, die-cut parts
-


- Material: Closed-cell EVA foam backing
- Adhesive: Hot melt or acrylic adhesive
- Structure: One adhesive side, one exposed foam side
- Thickness: 1 mm – 10 mm typical range
- Liner: Release paper or release film
- Format: Rolls, strips, sheets, or die-cut pads