No products were found matching your selection.

Other Related Products

  • Window Glazing Tapes

    • Common thickness: 0.8 mm-6.4 mm or custom
    • Common width: 6 mm-25 mm slit rolls
    • Color options: Black, white, grey
    • Foam options: PE foam or PVC foam
    • Adhesive: Double sided acrylic PSA
    • Use: Window and door glazing assembly
    Read moreDone

  • EPDM Sponge Rubber Properties and Technical Data

    EPDM sponge rubber properties should be read with the material grade and test condition. This reference covers closed-cell EPDM sponge for sealing, cushioning, gasket conversion, and PSA-backed constructions. It focuses on density, compression behavior, water absorption, mechanical response, service temperature, and ozone resistance. Use typical data for technical screening; confirm critical values on the intended grade, surface, load, and environment before full use or project approval.

    Read moreDone

  • Firm Grade EPDM Sponge

    • Material: Firm-grade closed-cell EPDM sponge
    • Color: Black as standard
    • Density: 180-220 kg/m3 typical reference
    • Thickness: 2mm-50mm sheet and roll options
    • Format: Sheet, roll, slit strip, die-cut pad
    • Backing: Plain or adhesive-backed for positioning
    Read moreDone

  • EPDM Foam Adhesive Tape

    • Common size: 1 mm-20 mm thickness, custom slit width
    • Color: black EPDM foam, liner color optional
    • Material: closed cell EPDM foam carrier
    • Adhesive: single-sided or double-sided PSA
    • Liner: kraft paper, PE-coated paper, or film liner
    • Use: sealing, cushioning, bonding, gasket converting
    Read moreDone

  • EPDM Open Cell Foam – Versatile and Customizable Foam Solutions

    • Material: EPDM Open Cell Foam (Flexible, Lightweight, and Insulating)
    • Thickness: Available from 1/8 inch to 2 inches
    • Color Options: Typically Black, with custom colors available
    • Density: Customizable for specific application requirements (Low to Medium Density)
    • Shape: Supplied in sheets, rolls, or custom-cut pieces for precise application
    • Temperature Range: -40°C to +120°C, ideal for both cold and hot environments
    Read moreDone

  • Double Sided Acrylic Adhesive Tape

    • Common widths: 6 mm to 1240 mm slit rolls
    • Thickness options: 0.10 mm to 1.50 mm typical
    • Adhesive: Double-sided acrylic PSA coating
    • Liner: Red PE release liner, 60-100 um typical
    • Tape body: Clear or translucent, not red adhesive body
    • Use: Metal, glass, plastic, panel, nameplate, trim bonding
    Read moreDone

  • EPDM Sponge Rubber Gaskets

    • Typical format: die-cut frame, pad, cover, and enclosure gasket parts
    • Thickness: 1 mm to 25 mm, matched to gap and compression target
    • Material: closed cell EPDM sponge rubber
    • Color: black standard, other colors reviewed by requirement
    • Backing: plain, PSA backed, or kiss-cut on release liner
    • Drawing details: outer size, inner opening, bolt holes, radius, and wall width
    Read moreDone

  • Single Sided EVA Foam Tape

    • Material: Closed-cell EVA foam backing
    • Adhesive: Hot melt or acrylic adhesive
    • Structure: One adhesive side, one exposed foam side
    • Thickness: 1 mm – 10 mm typical range
    • Liner: Release paper or release film
    • Format: Rolls, strips, sheets, or die-cut pads
    Read moreDone

  • Double Sided Opp Tape Jumbo Roll

    • Material:Transparent OPP film carrier
    • Adhesive:Double-sided pressure-sensitive adhesive
    • Liner:White or yellow release paper liner
    • Thickness:80um, 90um, 100um, 120um options
    • Roll Form:Wide jumbo roll for rewinding and slitting
    • Use:Packaging, labels, and thin film lamination
    Read moreDone