No products were found matching your selection.

Other Related Products

  • EPDM Closed Cell Foam

    •  Material: closed-cell EPDM sponge rubber
    •  Color: black, with custom color on request
    •  Thickness: 1 mm-50 mm typical
    •  Density grades: soft, medium, firm, 80-220 kg/m3 typical
    •  Supply form: roll, EPDM sponge rubber sheet, slit strip, and cut length
    •  Use: air sealing, water sealing, spacing, cushioning, and outdoor protection
    Read moreDone

  • Double Sided Acrylic Adhesive Tape

    • Common widths: 6 mm to 1240 mm slit rolls
    • Thickness options: 0.10 mm to 1.50 mm typical
    • Adhesive: Double-sided acrylic PSA coating
    • Liner: Red PE release liner, 60-100 um typical
    • Tape body: Clear or translucent, not red adhesive body
    • Use: Metal, glass, plastic, panel, nameplate, trim bonding
    Read moreDone

  • Building Construction Acrylic Foam Tape

    • Thickness: 0.4 mm, 0.8 mm, 1.1 mm, 1.6 mm, 2.0 mm, 2.3 mm
    • Colors: gray, black, white, clear on request
    • Core: closed-cell acrylic foam
    • Adhesive: high-bond acrylic PSA
    • Liner: red PE film or release paper
    • Format: slit rolls, strips, pads, kiss-cut and die-cut parts
    Read moreDone

  • EPDM Composite Sponge Door Seal Strip

    • Material: EPDM sponge sealing bulb with solid EPDM support section
    • Color: Black, with other colors available by production request
    • Profile types: Hollow bulb, side bulb, top bulb, U-channel edge seal
    • Grip range: Common 1-5 mm flange or door-edge range
    • Compression guide: 25-40% bulb compression after door closing
    • Supply form: Coils, straight cut lengths, joined frames, sample profiles
    Read moreDone

  • Window Glazing Tapes

    • Common thickness: 0.8 mm-6.4 mm or custom
    • Common width: 6 mm-25 mm slit rolls
    • Color options: Black, white, grey
    • Foam options: PE foam or PVC foam
    • Adhesive: Double sided acrylic PSA
    • Use: Window and door glazing assembly
    Read moreDone

  • Semi Closed Cell EPDM Foam

    • Thickness: 3 mm-30 mm typical range for strips, rolls, and sheets
    • Density: 80-130 kg/m3 for soft compression and recovery
    • Color: black, grey, or project-specific color options
    • Material: semi-closed cell EPDM sponge for controlled sealing
    • Backing: plain foam or PSA laminated foam with release liner
    • Use: automotive HVAC, access panels, air ducts, and converted foam strips
    Read moreDone

  • Artificial Grass Tape And Adhesive

    • Common width: 15 cm, 20 cm, 25 cm, 30 cm, or custom
    • Roll length: 5 m, 10 m, 20 m, 50 m, 100 m, 300 m, or custom
    • Color: green backing, white liner, or project-based option
    • Backing material: non-woven fabric, PP cloth, PET film, or composite backing
    • Adhesive option: hot melt, acrylic, or used with turf adhesive glue
    • Type: single-sided, double-sided, self adhesive, or glue-applied system
    Read moreDone

  • EPDM Sponge Rubber Properties and Technical Data

    EPDM sponge rubber properties should be read with the material grade and test condition. This reference covers closed-cell EPDM sponge for sealing, cushioning, gasket conversion, and PSA-backed constructions. It focuses on density, compression behavior, water absorption, mechanical response, service temperature, and ozone resistance. Use typical data for technical screening; confirm critical values on the intended grade, surface, load, and environment before full use or project approval.

    Read moreDone

  • Closed Cell EPDM Sponge Rubber

    • Material: closed-cell EPDM sponge rubber
    • Color: black standard, color review available
    • Formats: sheet, roll, block, slit strip
    • Thickness: 1 mm-50 mm typical range
    • Density: soft, medium, firm options
    • Finish: plain or adhesive-backed surface
    Read moreDone