No products were found matching your selection.
Other Related Products
-
- Common width: 15 cm, 20 cm, 25 cm, 30 cm, or custom
- Roll length: 5 m, 10 m, 20 m, 50 m, 100 m, 300 m, or custom
- Color: green backing, white liner, or project-based option
- Backing material: non-woven fabric, PP cloth, PET film, or composite backing
- Adhesive option: hot melt, acrylic, or used with turf adhesive glue
- Type: single-sided, double-sided, self adhesive, or glue-applied system
-
- Typical format: die-cut frame, pad, cover, and enclosure gasket parts
- Thickness: 1 mm to 25 mm, matched to gap and compression target
- Material: closed cell EPDM sponge rubber
- Color: black standard, other colors reviewed by requirement
- Backing: plain, PSA backed, or kiss-cut on release liner
- Drawing details: outer size, inner opening, bolt holes, radius, and wall width
-
EPDM sponge rubber properties should be read with the material grade and test condition. This reference covers closed-cell EPDM sponge for sealing, cushioning, gasket conversion, and PSA-backed constructions. It focuses on density, compression behavior, water absorption, mechanical response, service temperature, and ozone resistance. Use typical data for technical screening; confirm critical values on the intended grade, surface, load, and environment before full use or project approval.
-
- Size: 10 mm x 100 mm pre-cut strips, convenient for bulk pre-cut packs
- Material: Transparent PET film with skin-safe adhesive
- Color: Clear, nearly invisible on all fabrics (clear strip)
- Hold: Temporary with low residue, safe for delicate fabrics
- Packaging: Available in bulk packs or private label options
- Compatibility: Ideal for collars, cuffs, hemlines, and small button gaps; tested for up to 5 clean repositionings
-
Double sided tape for automotive applications helps attach trim, emblems, interior parts, foam seals and anti-rattle pads without visible screws or liquid adhesive overflow. The right tape should be selected by substrate type, coating condition, bond-line thickness, adhesive chemistry, compression need, application pressure, dwell time, service temperature and load direction. Common risks include trim edge lifting, weak wet-out on textured plastic, foam compression set, difficult liner removal and adhesive transfer during rework. Final selection should be based on real-substrate sample testing and a trial run before repeated assembly.
-
- Material: closed cell PVC, PE, EPDM, or neoprene blend foam
- Structure: single sided PSA with paper or film release liner
- Thickness: 1 mm-12 mm, with custom thickness available
- Roll width: 5 mm-1000 mm slit rolls or master rolls
- Colors: black, gray, white, or custom color by grade
- Uses: enclosure, HVAC, cabinet, and equipment panel sealing
-
- Common thickness: 70um-160um
- Carrier: lightweight tissue paper
- Adhesive: acrylic, hot melt, or rubber PSA
- Color: translucent tape with white or yellow liner
- Formats: jumbo roll, log roll, slit roll, die-cut parts
- Use: paper, plastic film, foam, label bonding
-
- Material: closed-cell EPDM foam or sponge rubber
- Color: black standard, grey optional
- Thickness: 1 mm to 25 mm typical
- Shapes: frames, rings, washers, strips, and irregular gaskets
- Adhesive: plain, single-sided PSA, or double-sided PSA
- Delivery: loose pieces, sheeted parts, or kiss-cut rolls
-
- Common thickness: 2 mm, 3 mm, 5 mm, 6 mm, 10 mm, 12 mm
- Color: Black, grey, charcoal grey, or white
- Material: Low-density open-cell polyurethane foam, 24-48 kg/m3 typical
- Adhesive: Single-side acrylic PSA, 40-70 um typical
- Liner: Paper or film release liner, 80-120 um typical
- Use: Compression sealing, cushioning, dust sealing, and die-cut gaskets
