No products were found matching your selection.
Other Related Products
-
- Common widths: 6 mm to 1240 mm slit rolls
- Thickness options: 0.10 mm to 1.50 mm typical
- Adhesive: Double-sided acrylic PSA coating
- Liner: Red PE release liner, 60-100 um typical
- Tape body: Clear or translucent, not red adhesive body
- Use: Metal, glass, plastic, panel, nameplate, trim bonding
-
- Thickness: 3 mm-30 mm typical range for strips, rolls, and sheets
- Density: 80-130 kg/m3 for soft compression and recovery
- Color: black, grey, or project-specific color options
- Material: semi-closed cell EPDM sponge for controlled sealing
- Backing: plain foam or PSA laminated foam with release liner
- Use: automotive HVAC, access panels, air ducts, and converted foam strips
-
- Thickness: 0.4 mm, 0.8 mm, 1.1 mm, 1.6 mm, 2.0 mm, 2.3 mm
- Colors: gray, black, white, clear on request
- Core: closed-cell acrylic foam
- Adhesive: high-bond acrylic PSA
- Liner: red PE film or release paper
- Format: slit rolls, strips, pads, kiss-cut and die-cut parts
-
- Typical format: die-cut frame, pad, cover, and enclosure gasket parts
- Thickness: 1 mm to 25 mm, matched to gap and compression target
- Material: closed cell EPDM sponge rubber
- Color: black standard, other colors reviewed by requirement
- Backing: plain, PSA backed, or kiss-cut on release liner
- Drawing details: outer size, inner opening, bolt holes, radius, and wall width
-
This double sided tape data sheet explains how construction, thickness, peel adhesion, tack, static shear, temperature and storage data should be interpreted together. It applies to carrier-based and foam-supported pressure-sensitive double-sided tapes used on metal, glass, plastics and coated surfaces. Typical values are reference data rather than universal claims. Surface condition, application pressure, dwell, environment and load can change results, so the selected grade should be confirmed on representative samples before production release.
-
- Common size: 1 mm-20 mm thickness, custom slit width
- Color: black EPDM foam, liner color optional
- Material: closed cell EPDM foam carrier
- Adhesive: single-sided or double-sided PSA
- Liner: kraft paper, PE-coated paper, or film liner
- Use: sealing, cushioning, bonding, gasket converting
-
EPDM sponge rubber properties should be read with the material grade and test condition. This reference covers closed-cell EPDM sponge for sealing, cushioning, gasket conversion, and PSA-backed constructions. It focuses on density, compression behavior, water absorption, mechanical response, service temperature, and ozone resistance. Use typical data for technical screening; confirm critical values on the intended grade, surface, load, and environment before full use or project approval.
-
- Material: Closed cell neoprene sponge rubber
- Adhesive: Single-side acrylic PSA
- Color: Black as standard
- Thickness: 1.5-25 mm typical range
- Width: Slit rolls from 6 mm and above
- Liner: Paper or film release liner
-
- Size: 10 mm x 100 mm pre-cut strips, convenient for bulk pre-cut packs
- Material: Transparent PET film with skin-safe adhesive
- Color: Clear, nearly invisible on all fabrics (clear strip)
- Hold: Temporary with low residue, safe for delicate fabrics
- Packaging: Available in bulk packs or private label options
- Compatibility: Ideal for collars, cuffs, hemlines, and small button gaps; tested for up to 5 clean repositionings
