No products were found matching your selection.
Other Related Products
-
- Material:Made of low-density, open-cell urethane foam.
- Adhesive: One side is coated with a pressure-sensitive acrylic adhesive for strong bonding.
- Width: 10 mm, 25 mm wide.
- Length Per Roll: 18 yd, 36 yd.
- Thickness: 1.6 mm to 6.4 mm.
-
- Material: Closed cell EPDM sponge rubber
- Adhesive: Pressure-sensitive adhesive (PSA) options
- Standard thickness: 1 mm – 25 mm (custom available)
- Liner: Easy-release liner for accurate placement
- Color: Black
- Form: Sheet (kiss-cut, slit, or die-cut compatible)
-
- Thickness: Available in thickness Available in thicknesses from 1mm to 9mm.
- Width: Single or double sided in 9 mm, 10mm, 12 mm, 15mm widths.
- Length: 10m, 15m, 20m, 40m or customize.
- Material: Closed Cell High Performance PVC Security Glazing Tape.
- Adhesive: UV Resistant solvent-based pure acrylic adhesive for Permanent Fixing.
- Colors Available: Black and White.
-
- Material: EPDM Sponge Rubber & Gasket with advanced closed-cell technology
- Thickness: 1/16 inch to 3/4 inch based on sealing and cushioning needs
- Color: Black and Grey, with custom colors for special requirements
- Density: Flexible low-density for shock absorption or high-density for heavy-duty sealing
- Form Availability: Available in gasket form, pre-cut sheets, and rolls for ease of installation
- Temperature Performance: Withstands temperature extremes from -40°C to +120°C without compromising flexibility or sealing power
-
- Length: 10m, 20m, 30m, 50m.
- Width: 10mm, 20mm, 24mm, 36mm,40mm, 45mm, 55mm, 60mm.
- Thickness: 160mic, 180mic, 200mic and 220 micron.
- Material: Made with mesh-reinforced fabric and hot melt adhesive on both sides for superior sticking power.
-
- Material:The material is typically high-quality neoprene foam (synthetic rubber).
- Construction: Closed cell neoprene sponge which is coated on one side with an aggressive acrylic based adhesive.
- Release paper color: Yellow, Light yellow, White and Red.
- Widths: Common standard sizes might include3mm 5mm 6mm 8mm 10mm.
- Length Range: 5m, 10m, 15m, 20m, 25m or customize.
- Thickness: From 2mm to 19mm.
-
- Width Options: 10 mm, 12 mm, 19 mm.
- Length Per Roll: 5 m, 10 m, 33 m.
- Foam Thickness: 0.5 mm, 1 mm, 1.5 mm, 2 mm or customize.
- Color: White or black polyethylene foam。
- Adhesive: Acrylic.
-
- Material system: Neoprene / EPDM / SBR blend
- Cell structure: Closed cell
- Firmness: Soft to medium (blend-dependent)
- Thickness range: 0.5 mm – 25 mm (custom supported)
- Color: Black
- Form: Sheet for cutting, slitting, and die-cut conversion
-
- Adhesive: Moderate tack for firm and clean bonding.
- Liner: White silicone paper for easy release.
- Item Material: NBR Sponge.
- Backing Thickness: 3 mm, 6 mm.
- Width: From 10 mm to 1600 mm.
- Length: From 100 mm to 2000 mm.
