No products were found matching your selection.
Other Related Products
-
- Common thickness: 2 mm, 3 mm, 5 mm, 6 mm, 10 mm, 12 mm
- Color: Black, grey, charcoal grey, or white
- Material: Low-density open-cell polyurethane foam, 24-48 kg/m3 typical
- Adhesive: Single-side acrylic PSA, 40-70 um typical
- Liner: Paper or film release liner, 80-120 um typical
- Use: Compression sealing, cushioning, dust sealing, and die-cut gaskets
-
- Common Size: 24 mm, 36 mm, 48 mm, 72 mm, custom slit width
- Color: White adhesive with white or yellow release liner
- Structure: Double coated pressure-sensitive adhesive tape
- Adhesive Type: Rubber-based or hot melt adhesive options
- Thickness Options: Typical 260-400 um total thickness
- Applications: Carpet, mat, exhibition carpet, temporary flooring fixation
-
- Material: EPDM Open Cell Foam (Flexible, Lightweight, and Insulating)
- Thickness: Available from 1/8 inch to 2 inches
- Color Options: Typically Black, with custom colors available
- Density: Customizable for specific application requirements (Low to Medium Density)
- Shape: Supplied in sheets, rolls, or custom-cut pieces for precise application
- Temperature Range: -40°C to +120°C, ideal for both cold and hot environments
-
- Material: Closed-cell EVA foam backing
- Adhesive: Hot melt or acrylic adhesive
- Structure: One adhesive side, one exposed foam side
- Thickness: 1 mm – 10 mm typical range
- Liner: Release paper or release film
- Format: Rolls, strips, sheets, or die-cut pads
-
- Material: closed-cell EPDM sponge rubber
- Color: black, with custom color on request
- Thickness: 1 mm-50 mm typical
- Density grades: soft, medium, firm, 80-220 kg/m3 typical
- Supply form: roll, EPDM sponge rubber sheet, slit strip, and cut length
- Use: air sealing, water sealing, spacing, cushioning, and outdoor protection
-
EPDM sponge rubber properties should be read with the material grade and test condition. This reference covers closed-cell EPDM sponge for sealing, cushioning, gasket conversion, and PSA-backed constructions. It focuses on density, compression behavior, water absorption, mechanical response, service temperature, and ozone resistance. Use typical data for technical screening; confirm critical values on the intended grade, surface, load, and environment before full use or project approval.
-
- Typical format: die-cut frame, pad, cover, and enclosure gasket parts
- Thickness: 1 mm to 25 mm, matched to gap and compression target
- Material: closed cell EPDM sponge rubber
- Color: black standard, other colors reviewed by requirement
- Backing: plain, PSA backed, or kiss-cut on release liner
- Drawing details: outer size, inner opening, bolt holes, radius, and wall width
-
- Common Width: 10 mm, 15 mm, 20 mm, 25 mm
- Common Thickness: 3 mm, 4 mm, 5 mm, 6 mm
- Color: Black
- Base Material: Fiber, felt, foam, or fiberglass
- Backing: Self adhesive liner
- Use Area: BBQ lid, door, and body edge
-
- Material: PET film carrier with double-coated acrylic adhesive
- Color: Transparent tape with red, yellow, or clear release liner
- Thickness: 0.05 mm, 0.10 mm, 0.125 mm, 0.20 mm
- Width: 3 mm-1240 mm slit rolls available
- Length: 50 m, 100 m, or jumbo roll format
- Processing: Slitting, die cutting, kiss cutting, sheet cutting
