No products were found matching your selection.

Other Related Products

  • Single Sided EVA Foam Tape

    • Material: Closed-cell EVA foam backing
    • Adhesive: Hot melt or acrylic adhesive
    • Structure: One adhesive side, one exposed foam side
    • Thickness: 1 mm – 10 mm typical range
    • Liner: Release paper or release film
    • Format: Rolls, strips, sheets, or die-cut pads
    Read moreDone

  • Semi Closed Cell EPDM Foam

    • Thickness: 3 mm-30 mm typical range for strips, rolls, and sheets
    • Density: 80-130 kg/m3 for soft compression and recovery
    • Color: black, grey, or project-specific color options
    • Material: semi-closed cell EPDM sponge for controlled sealing
    • Backing: plain foam or PSA laminated foam with release liner
    • Use: automotive HVAC, access panels, air ducts, and converted foam strips
    Read moreDone

  • PE Foam Adhesive Tape

    • Material: PE foam carrier with acrylic or rubber PSA
    • Structure: Single-sided or double-sided adhesive coating
    • Thickness: 5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
    • Color: White, black, grey, or project-based color
    • Liner: Paper liner or PE film liner for converting
    • Use: Cushioning, spacing, light sealing, fixing, and die-cut parts
    Read moreDone

  • Nano Adhesive Tape Roll

    • Common thickness: 0.5mm, 1mm, 1.5mm, 2mm
    • Color: clear transparent gel body
    • Material: acrylic gel adhesive
    • Width: custom slit narrow or wide rolls
    • Roll length: 3m, 5m, 10m, 20m, 50m, 100m, 300m
    • Core option: 38mm or 76mm paper core
    Read moreDone

  • Window Glazing Tapes

    • Common thickness: 0.8 mm-6.4 mm or custom
    • Common width: 6 mm-25 mm slit rolls
    • Color options: Black, white, grey
    • Foam options: PE foam or PVC foam
    • Adhesive: Double sided acrylic PSA
    • Use: Window and door glazing assembly
    Read moreDone

  • EPDM Sponge Rubber Properties and Technical Data

    EPDM sponge rubber properties should be read with the material grade and test condition. This reference covers closed-cell EPDM sponge for sealing, cushioning, gasket conversion, and PSA-backed constructions. It focuses on density, compression behavior, water absorption, mechanical response, service temperature, and ozone resistance. Use typical data for technical screening; confirm critical values on the intended grade, surface, load, and environment before full use or project approval.

    Read moreDone
  • double sided tissue tape 24mmdouble sided tissue tape uses

    Tissue double sided tape

    • Common thickness: 70um-160um
    • Carrier: lightweight tissue paper
    • Adhesive: acrylic, hot melt, or rubber PSA
    • Color: translucent tape with white or yellow liner
    • Formats: jumbo roll, log roll, slit roll, die-cut parts
    • Use: paper, plastic film, foam, label bonding
    Read moreDone

  • EPDM Composite Sponge Door Seal Strip

    • Material: EPDM sponge sealing bulb with solid EPDM support section
    • Color: Black, with other colors available by production request
    • Profile types: Hollow bulb, side bulb, top bulb, U-channel edge seal
    • Grip range: Common 1-5 mm flange or door-edge range
    • Compression guide: 25-40% bulb compression after door closing
    • Supply form: Coils, straight cut lengths, joined frames, sample profiles
    Read moreDone

  • EPDM Sponge Adhesive Seal

    • Common thickness: 2 mm to 15 mm
    • Standard color: black EPDM sponge
    • Material: closed cell EPDM sponge rubber
    • Backing: one-side pressure sensitive adhesive
    • Liner: paper or film release liner
    • Supply form: rolls, strips, custom slit widths
    Read moreDone