No products were found matching your selection.

Other Related Products

  • Closed Cell Foam Gasket Tape

    •  Material: closed cell PVC, PE, EPDM, or neoprene blend foam
    •  Structure: single sided PSA with paper or film release liner
    •  Thickness: 1 mm-12 mm, with custom thickness available
    •  Roll width: 5 mm-1000 mm slit rolls or master rolls
    •  Colors: black, gray, white, or custom color by grade
    •  Uses: enclosure, HVAC, cabinet, and equipment panel sealing
    Read moreDone

  • Double Sided Opp Tape Jumbo Roll

    • Material:Transparent OPP film carrier
    • Adhesive:Double-sided pressure-sensitive adhesive
    • Liner:White or yellow release paper liner
    • Thickness:80um, 90um, 100um, 120um options
    • Roll Form:Wide jumbo roll for rewinding and slitting
    • Use:Packaging, labels, and thin film lamination
    Read moreDone

  • Window Glazing Tapes

    • Common thickness: 0.8 mm-6.4 mm or custom
    • Common width: 6 mm-25 mm slit rolls
    • Color options: Black, white, grey
    • Foam options: PE foam or PVC foam
    • Adhesive: Double sided acrylic PSA
    • Use: Window and door glazing assembly
    Read moreDone

  • EPDM Sponge Rubber Properties and Technical Data

    EPDM sponge rubber properties should be read with the material grade and test condition. This reference covers closed-cell EPDM sponge for sealing, cushioning, gasket conversion, and PSA-backed constructions. It focuses on density, compression behavior, water absorption, mechanical response, service temperature, and ozone resistance. Use typical data for technical screening; confirm critical values on the intended grade, surface, load, and environment before full use or project approval.

    Read moreDone

  • Custom EPDM Foam Gaskets

    • Material: closed-cell EPDM foam or sponge rubber
    • Color: black standard, grey optional
    • Thickness: 1 mm to 25 mm typical
    • Shapes: frames, rings, washers, strips, and irregular gaskets
    • Adhesive: plain, single-sided PSA, or double-sided PSA
    • Delivery: loose pieces, sheeted parts, or kiss-cut rolls
    Read moreDone

  • EPDM Sponge Rubber Extrusions

    • Size: custom profile width 5-80 mm, larger sections by tooling
    • Color: black standard, other colors by compound review
    • Material: EPDM sponge rubber, closed-cell or semi-closed structure
    • Shape: D, P, E, O, U-channel, hollow bulb, solid strip
    • Surface: extruded skin surface, optional PSA backing or punched holes
    • Use: door seals, cabinet seals, vehicle seals, equipment covers
    Read moreDone

  • EPDM Open Cell Foam – Versatile and Customizable Foam Solutions

    • Material: EPDM Open Cell Foam (Flexible, Lightweight, and Insulating)
    • Thickness: Available from 1/8 inch to 2 inches
    • Color Options: Typically Black, with custom colors available
    • Density: Customizable for specific application requirements (Low to Medium Density)
    • Shape: Supplied in sheets, rolls, or custom-cut pieces for precise application
    • Temperature Range: -40°C to +120°C, ideal for both cold and hot environments
    Read moreDone

  • Double Sided Acrylic Adhesive Tape

    • Common widths: 6 mm to 1240 mm slit rolls
    • Thickness options: 0.10 mm to 1.50 mm typical
    • Adhesive: Double-sided acrylic PSA coating
    • Liner: Red PE release liner, 60-100 um typical
    • Tape body: Clear or translucent, not red adhesive body
    • Use: Metal, glass, plastic, panel, nameplate, trim bonding
    Read moreDone

  • Semi Closed Cell EPDM Foam

    • Thickness: 3 mm-30 mm typical range for strips, rolls, and sheets
    • Density: 80-130 kg/m3 for soft compression and recovery
    • Color: black, grey, or project-specific color options
    • Material: semi-closed cell EPDM sponge for controlled sealing
    • Backing: plain foam or PSA laminated foam with release liner
    • Use: automotive HVAC, access panels, air ducts, and converted foam strips
    Read moreDone