No products were found matching your selection.
Other Related Products
-
Double sided tape for automotive applications helps attach trim, emblems, interior parts, foam seals and anti-rattle pads without visible screws or liquid adhesive overflow. The right tape should be selected by substrate type, coating condition, bond-line thickness, adhesive chemistry, compression need, application pressure, dwell time, service temperature and load direction. Common risks include trim edge lifting, weak wet-out on textured plastic, foam compression set, difficult liner removal and adhesive transfer during rework. Final selection should be based on real-substrate sample testing and a trial run before repeated assembly.
-
- Material: closed-cell EPDM sponge rubber
- Color: black standard, color review available
- Formats: sheet, roll, block, slit strip
- Thickness: 1 mm-50 mm typical range
- Density: soft, medium, firm options
- Finish: plain or adhesive-backed surface
-
- Size: 10 mm x 100 mm pre-cut strips, convenient for bulk pre-cut packs
- Material: Transparent PET film with skin-safe adhesive
- Color: Clear, nearly invisible on all fabrics (clear strip)
- Hold: Temporary with low residue, safe for delicate fabrics
- Packaging: Available in bulk packs or private label options
- Compatibility: Ideal for collars, cuffs, hemlines, and small button gaps; tested for up to 5 clean repositionings
-
- Common width: 15 cm, 20 cm, 25 cm, 30 cm, or custom
- Roll length: 5 m, 10 m, 20 m, 50 m, 100 m, 300 m, or custom
- Color: green backing, white liner, or project-based option
- Backing material: non-woven fabric, PP cloth, PET film, or composite backing
- Adhesive option: hot melt, acrylic, or used with turf adhesive glue
- Type: single-sided, double-sided, self adhesive, or glue-applied system
-
- Common size: 1 mm-20 mm thickness, custom slit width
- Color: black EPDM foam, liner color optional
- Material: closed cell EPDM foam carrier
- Adhesive: single-sided or double-sided PSA
- Liner: kraft paper, PE-coated paper, or film liner
- Use: sealing, cushioning, bonding, gasket converting
-
- Material: Closed-cell EVA foam backing
- Adhesive: Hot melt or acrylic adhesive
- Structure: One adhesive side, one exposed foam side
- Thickness: 1 mm – 10 mm typical range
- Liner: Release paper or release film
- Format: Rolls, strips, sheets, or die-cut pads
-
- Material: PE foam carrier with acrylic or rubber PSA
- Structure: Single-sided or double-sided adhesive coating
- Thickness: 5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Color: White, black, grey, or project-based color
- Liner: Paper liner or PE film liner for converting
- Use: Cushioning, spacing, light sealing, fixing, and die-cut parts
-
- Material: EPDM sponge sealing bulb with solid EPDM support section
- Color: Black, with other colors available by production request
- Profile types: Hollow bulb, side bulb, top bulb, U-channel edge seal
- Grip range: Common 1-5 mm flange or door-edge range
- Compression guide: 25-40% bulb compression after door closing
- Supply form: Coils, straight cut lengths, joined frames, sample profiles
-
- Material: closed-cell EPDM sponge rubber
- Color: black, with custom color on request
- Thickness: 1 mm-50 mm typical
- Density grades: soft, medium, firm, 80-220 kg/m3 typical
- Supply form: roll, EPDM sponge rubber sheet, slit strip, and cut length
- Use: air sealing, water sealing, spacing, cushioning, and outdoor protection
