No products were found matching your selection.
Other Related Products
-
- Common thickness: 2 mm, 3 mm, 5 mm, 6 mm, 10 mm, 12 mm
- Color: Black, grey, charcoal grey, or white
- Material: Low-density open-cell polyurethane foam, 24-48 kg/m3 typical
- Adhesive: Single-side acrylic PSA, 40-70 um typical
- Liner: Paper or film release liner, 80-120 um typical
- Use: Compression sealing, cushioning, dust sealing, and die-cut gaskets
-
- Common thickness: 0.5mm, 1mm, 1.5mm, 2mm
- Color: clear transparent gel body
- Material: acrylic gel adhesive
- Width: custom slit narrow or wide rolls
- Roll length: 3m, 5m, 10m, 20m, 50m, 100m, 300m
- Core option: 38mm or 76mm paper core
-
- Material: closed cell PVC, PE, EPDM, or neoprene blend foam
- Structure: single sided PSA with paper or film release liner
- Thickness: 1 mm-12 mm, with custom thickness available
- Roll width: 5 mm-1000 mm slit rolls or master rolls
- Colors: black, gray, white, or custom color by grade
- Uses: enclosure, HVAC, cabinet, and equipment panel sealing
-
- Material: PET film carrier with double-coated acrylic adhesive
- Color: Transparent tape with red, yellow, or clear release liner
- Thickness: 0.05 mm, 0.10 mm, 0.125 mm, 0.20 mm
- Width: 3 mm-1240 mm slit rolls available
- Length: 50 m, 100 m, or jumbo roll format
- Processing: Slitting, die cutting, kiss cutting, sheet cutting
-
- Material: closed-cell EPDM foam or sponge rubber
- Color: black standard, grey optional
- Thickness: 1 mm to 25 mm typical
- Shapes: frames, rings, washers, strips, and irregular gaskets
- Adhesive: plain, single-sided PSA, or double-sided PSA
- Delivery: loose pieces, sheeted parts, or kiss-cut rolls
-
- Material: closed-cell EPDM sponge rubber
- Color: black, with custom color on request
- Thickness: 1 mm-50 mm typical
- Density grades: soft, medium, firm, 80-220 kg/m3 typical
- Supply form: roll, EPDM sponge rubber sheet, slit strip, and cut length
- Use: air sealing, water sealing, spacing, cushioning, and outdoor protection
-
- Material: closed-cell EPDM sponge rubber
- Color: black standard, color review available
- Formats: sheet, roll, block, slit strip
- Thickness: 1 mm-50 mm typical range
- Density: soft, medium, firm options
- Finish: plain or adhesive-backed surface
-
Double sided tape for automotive applications helps attach trim, emblems, interior parts, foam seals and anti-rattle pads without visible screws or liquid adhesive overflow. The right tape should be selected by substrate type, coating condition, bond-line thickness, adhesive chemistry, compression need, application pressure, dwell time, service temperature and load direction. Common risks include trim edge lifting, weak wet-out on textured plastic, foam compression set, difficult liner removal and adhesive transfer during rework. Final selection should be based on real-substrate sample testing and a trial run before repeated assembly.
-
- Material: EPDM Open Cell Foam (Flexible, Lightweight, and Insulating)
- Thickness: Available from 1/8 inch to 2 inches
- Color Options: Typically Black, with custom colors available
- Density: Customizable for specific application requirements (Low to Medium Density)
- Shape: Supplied in sheets, rolls, or custom-cut pieces for precise application
- Temperature Range: -40°C to +120°C, ideal for both cold and hot environments
