No products were found matching your selection.

Other Related Products

  • EPDM Closed Cell Foam

    •  Material: closed-cell EPDM sponge rubber
    •  Color: black, with custom color on request
    •  Thickness: 1 mm-50 mm typical
    •  Density grades: soft, medium, firm, 80-220 kg/m3 typical
    •  Supply form: roll, EPDM sponge rubber sheet, slit strip, and cut length
    •  Use: air sealing, water sealing, spacing, cushioning, and outdoor protection
    Read moreDone

  • Custom EPDM Foam Gaskets

    • Material: closed-cell EPDM foam or sponge rubber
    • Color: black standard, grey optional
    • Thickness: 1 mm to 25 mm typical
    • Shapes: frames, rings, washers, strips, and irregular gaskets
    • Adhesive: plain, single-sided PSA, or double-sided PSA
    • Delivery: loose pieces, sheeted parts, or kiss-cut rolls
    Read moreDone

  • Firm Grade EPDM Sponge

    • Material: Firm-grade closed-cell EPDM sponge
    • Color: Black as standard
    • Density: 180-220 kg/m3 typical reference
    • Thickness: 2mm-50mm sheet and roll options
    • Format: Sheet, roll, slit strip, die-cut pad
    • Backing: Plain or adhesive-backed for positioning
    Read moreDone

  • EPDM Foam Adhesive Tape

    • Common size: 1 mm-20 mm thickness, custom slit width
    • Color: black EPDM foam, liner color optional
    • Material: closed cell EPDM foam carrier
    • Adhesive: single-sided or double-sided PSA
    • Liner: kraft paper, PE-coated paper, or film liner
    • Use: sealing, cushioning, bonding, gasket converting
    Read moreDone

  • PET Heat Resistant Double Sided Tape

    • Material: PET film carrier with double-coated acrylic adhesive
    • Color: Transparent tape with red, yellow, or clear release liner
    • Thickness: 0.05 mm, 0.10 mm, 0.125 mm, 0.20 mm
    • Width: 3 mm-1240 mm slit rolls available
    • Length: 50 m, 100 m, or jumbo roll format
    • Processing: Slitting, die cutting, kiss cutting, sheet cutting
    Read moreDone

  • Hot Melt Foam Tape

    • Material:PE, EVA, or IXPE foam carrier
    • Adhesive:Hot melt PSA coating
    • Structure:Single sided or double sided foam tape
    • Color:White, black, grey, or custom color
    • Thickness:Common 0.5mm to 5mm options
    • Surface:Plastic, metal, painted panel, ABS, PP, acrylic
    Read moreDone

  • Single Sided EVA Foam Tape

    • Material: Closed-cell EVA foam backing
    • Adhesive: Hot melt or acrylic adhesive
    • Structure: One adhesive side, one exposed foam side
    • Thickness: 1 mm – 10 mm typical range
    • Liner: Release paper or release film
    • Format: Rolls, strips, sheets, or die-cut pads
    Read moreDone

  • Double Sided Acrylic Adhesive Tape

    • Common widths: 6 mm to 1240 mm slit rolls
    • Thickness options: 0.10 mm to 1.50 mm typical
    • Adhesive: Double-sided acrylic PSA coating
    • Liner: Red PE release liner, 60-100 um typical
    • Tape body: Clear or translucent, not red adhesive body
    • Use: Metal, glass, plastic, panel, nameplate, trim bonding
    Read moreDone

  • EPDM Sponge Adhesive Seal

    • Common thickness: 2 mm to 15 mm
    • Standard color: black EPDM sponge
    • Material: closed cell EPDM sponge rubber
    • Backing: one-side pressure sensitive adhesive
    • Liner: paper or film release liner
    • Supply form: rolls, strips, custom slit widths
    Read moreDone