No products were found matching your selection.

Other Related Products

  • EPDM Foam Adhesive Tape

    • Common size: 1 mm-20 mm thickness, custom slit width
    • Color: black EPDM foam, liner color optional
    • Material: closed cell EPDM foam carrier
    • Adhesive: single-sided or double-sided PSA
    • Liner: kraft paper, PE-coated paper, or film liner
    • Use: sealing, cushioning, bonding, gasket converting
  • Nano Adhesive Tape Roll

    • Common thickness: 0.5mm, 1mm, 1.5mm, 2mm
    • Color: clear transparent gel body
    • Material: acrylic gel adhesive
    • Width: custom slit narrow or wide rolls
    • Roll length: 3m, 5m, 10m, 20m, 50m, 100m, 300m
    • Core option: 38mm or 76mm paper core
  • Semi Closed Cell EPDM Foam

    • Thickness: 3 mm-30 mm typical range for strips, rolls, and sheets
    • Density: 80-130 kg/m3 for soft compression and recovery
    • Color: black, grey, or project-specific color options
    • Material: semi-closed cell EPDM sponge for controlled sealing
    • Backing: plain foam or PSA laminated foam with release liner
    • Use: automotive HVAC, access panels, air ducts, and converted foam strips
  • Double Sided Foam Tape Jumbo Roll

    • Material: PE foam or EVA foam with double side adhesive coating
    • Colors: white, black, grey, or production color by request
    • Thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
    • Jumbo width: 1030 mm, 1040 mm, or 1200 mm typical
    • Adhesive: solvent acrylic, hot melt, or water-based acrylic
    • Format: jumbo roll, master roll, log roll, slit roll, or trial roll
  • EPDM Closed Cell Foam

    •  Material: closed-cell EPDM sponge rubber
    •  Color: black, with custom color on request
    •  Thickness: 1 mm-50 mm typical
    •  Density grades: soft, medium, firm, 80-220 kg/m3 typical
    •  Supply form: roll, EPDM sponge rubber sheet, slit strip, and cut length
    •  Use: air sealing, water sealing, spacing, cushioning, and outdoor protection
  • EPDM Sponge Rubber Properties and Technical Data

    EPDM sponge rubber properties should be read with the material grade and test condition. This reference covers closed-cell EPDM sponge for sealing, cushioning, gasket conversion, and PSA-backed constructions. It focuses on density, compression behavior, water absorption, mechanical response, service temperature, and ozone resistance. Use typical data for technical screening; confirm critical values on the intended grade, surface, load, and environment before full use or project approval.

  • Artificial Grass Tape And Adhesive

    • Common width: 15 cm, 20 cm, 25 cm, 30 cm, or custom
    • Roll length: 5 m, 10 m, 20 m, 50 m, 100 m, 300 m, or custom
    • Color: green backing, white liner, or project-based option
    • Backing material: non-woven fabric, PP cloth, PET film, or composite backing
    • Adhesive option: hot melt, acrylic, or used with turf adhesive glue
    • Type: single-sided, double-sided, self adhesive, or glue-applied system
  • Building Construction Acrylic Foam Tape

    • Thickness: 0.4 mm, 0.8 mm, 1.1 mm, 1.6 mm, 2.0 mm, 2.3 mm
    • Colors: gray, black, white, clear on request
    • Core: closed-cell acrylic foam
    • Adhesive: high-bond acrylic PSA
    • Liner: red PE film or release paper
    • Format: slit rolls, strips, pads, kiss-cut and die-cut parts
  • Double Stick Tape For Clothing

    • Size: 10 mm x 100 mm pre-cut strips, convenient for bulk pre-cut packs
    • Material: Transparent PET film with skin-safe adhesive
    • Color: Clear, nearly invisible on all fabrics (clear strip)
    • Hold: Temporary with low residue, safe for delicate fabrics
    • Packaging: Available in bulk packs or private label options
    • Compatibility: Ideal for collars, cuffs, hemlines, and small button gaps; tested for up to 5 clean repositionings