No products were found matching your selection.

Other Related Products

  • Nano Adhesive Tape Roll

    • Common thickness: 0.5mm, 1mm, 1.5mm, 2mm
    • Color: clear transparent gel body
    • Material: acrylic gel adhesive
    • Width: custom slit narrow or wide rolls
    • Roll length: 3m, 5m, 10m, 20m, 50m, 100m, 300m
    • Core option: 38mm or 76mm paper core
    Read moreDone

  • Custom EPDM Foam Gaskets

    • Material: closed-cell EPDM foam or sponge rubber
    • Color: black standard, grey optional
    • Thickness: 1 mm to 25 mm typical
    • Shapes: frames, rings, washers, strips, and irregular gaskets
    • Adhesive: plain, single-sided PSA, or double-sided PSA
    • Delivery: loose pieces, sheeted parts, or kiss-cut rolls
    Read moreDone

  • Building Construction Acrylic Foam Tape

    • Thickness: 0.4 mm, 0.8 mm, 1.1 mm, 1.6 mm, 2.0 mm, 2.3 mm
    • Colors: gray, black, white, clear on request
    • Core: closed-cell acrylic foam
    • Adhesive: high-bond acrylic PSA
    • Liner: red PE film or release paper
    • Format: slit rolls, strips, pads, kiss-cut and die-cut parts
    Read moreDone

  • Double Stick Tape For Clothing

    • Size: 10 mm x 100 mm pre-cut strips, convenient for bulk pre-cut packs
    • Material: Transparent PET film with skin-safe adhesive
    • Color: Clear, nearly invisible on all fabrics (clear strip)
    • Hold: Temporary with low residue, safe for delicate fabrics
    • Packaging: Available in bulk packs or private label options
    • Compatibility: Ideal for collars, cuffs, hemlines, and small button gaps; tested for up to 5 clean repositionings
    Read moreDone

  • Artificial Grass Tape And Adhesive

    • Common width: 15 cm, 20 cm, 25 cm, 30 cm, or custom
    • Roll length: 5 m, 10 m, 20 m, 50 m, 100 m, 300 m, or custom
    • Color: green backing, white liner, or project-based option
    • Backing material: non-woven fabric, PP cloth, PET film, or composite backing
    • Adhesive option: hot melt, acrylic, or used with turf adhesive glue
    • Type: single-sided, double-sided, self adhesive, or glue-applied system
    Read moreDone

  • BBQ Heat Sealing Tape

    • Common Width: 10 mm, 15 mm, 20 mm, 25 mm
    • Common Thickness: 3 mm, 4 mm, 5 mm, 6 mm
    • Color: Black
    • Base Material: Fiber, felt, foam, or fiberglass
    • Backing: Self adhesive liner
    • Use Area: BBQ lid, door, and body edge
    Read moreDone

  • Adhesive Sponge Rubber Neoprene Tape

    • Material: Closed cell neoprene sponge rubber
    • Adhesive: Single-side acrylic PSA
    • Color: Black as standard
    • Thickness: 1.5-25 mm typical range
    • Width: Slit rolls from 6 mm and above
    • Liner: Paper or film release liner
    Read moreDone

  • EPDM Sponge Rubber Properties and Technical Data

    EPDM sponge rubber properties should be read with the material grade and test condition. This reference covers closed-cell EPDM sponge for sealing, cushioning, gasket conversion, and PSA-backed constructions. It focuses on density, compression behavior, water absorption, mechanical response, service temperature, and ozone resistance. Use typical data for technical screening; confirm critical values on the intended grade, surface, load, and environment before full use or project approval.

    Read moreDone

  • EPDM Sponge Rubber Gaskets

    • Typical format: die-cut frame, pad, cover, and enclosure gasket parts
    • Thickness: 1 mm to 25 mm, matched to gap and compression target
    • Material: closed cell EPDM sponge rubber
    • Color: black standard, other colors reviewed by requirement
    • Backing: plain, PSA backed, or kiss-cut on release liner
    • Drawing details: outer size, inner opening, bolt holes, radius, and wall width
    Read moreDone