No products were found matching your selection.

Other Related Products

  • EPDM Sponge Rubber Gaskets

    • Typical format: die-cut frame, pad, cover, and enclosure gasket parts
    • Thickness: 1 mm to 25 mm, matched to gap and compression target
    • Material: closed cell EPDM sponge rubber
    • Color: black standard, other colors reviewed by requirement
    • Backing: plain, PSA backed, or kiss-cut on release liner
    • Drawing details: outer size, inner opening, bolt holes, radius, and wall width
    Read moreDone

  • EPDM Sponge Rubber Properties and Technical Data

    EPDM sponge rubber properties should be read with the material grade and test condition. This reference covers closed-cell EPDM sponge for sealing, cushioning, gasket conversion, and PSA-backed constructions. It focuses on density, compression behavior, water absorption, mechanical response, service temperature, and ozone resistance. Use typical data for technical screening; confirm critical values on the intended grade, surface, load, and environment before full use or project approval.

    Read moreDone

  • Semi Closed Cell EPDM Foam

    • Thickness: 3 mm-30 mm typical range for strips, rolls, and sheets
    • Density: 80-130 kg/m3 for soft compression and recovery
    • Color: black, grey, or project-specific color options
    • Material: semi-closed cell EPDM sponge for controlled sealing
    • Backing: plain foam or PSA laminated foam with release liner
    • Use: automotive HVAC, access panels, air ducts, and converted foam strips
    Read moreDone

  • EPDM Closed Cell Foam

    •  Material: closed-cell EPDM sponge rubber
    •  Color: black, with custom color on request
    •  Thickness: 1 mm-50 mm typical
    •  Density grades: soft, medium, firm, 80-220 kg/m3 typical
    •  Supply form: roll, EPDM sponge rubber sheet, slit strip, and cut length
    •  Use: air sealing, water sealing, spacing, cushioning, and outdoor protection
    Read moreDone

  • Neoprene EPDM Blend Foam

    • Material: Neoprene/EPDM closed-cell foam blend
    • Color: Black as standard
    • Thickness: 1 mm-40 mm typical range
    • Formats: Sheets, rolls, strips, gaskets, tapes
    • Adhesive: Plain, acrylic PSA, or rubber PSA
    • Use: Indoor and outdoor industrial sealing
    Read moreDone

  • Hot Melt Foam Tape

    • Material:PE, EVA, or IXPE foam carrier
    • Adhesive:Hot melt PSA coating
    • Structure:Single sided or double sided foam tape
    • Color:White, black, grey, or custom color
    • Thickness:Common 0.5mm to 5mm options
    • Surface:Plastic, metal, painted panel, ABS, PP, acrylic
    Read moreDone

  • PET Heat Resistant Double Sided Tape

    • Material: PET film carrier with double-coated acrylic adhesive
    • Color: Transparent tape with red, yellow, or clear release liner
    • Thickness: 0.05 mm, 0.10 mm, 0.125 mm, 0.20 mm
    • Width: 3 mm-1240 mm slit rolls available
    • Length: 50 m, 100 m, or jumbo roll format
    • Processing: Slitting, die cutting, kiss cutting, sheet cutting
    Read moreDone

  • Double Sided Acrylic Adhesive Tape

    • Common widths: 6 mm to 1240 mm slit rolls
    • Thickness options: 0.10 mm to 1.50 mm typical
    • Adhesive: Double-sided acrylic PSA coating
    • Liner: Red PE release liner, 60-100 um typical
    • Tape body: Clear or translucent, not red adhesive body
    • Use: Metal, glass, plastic, panel, nameplate, trim bonding
    Read moreDone

  • EPDM Sponge Rubber Extrusions

    • Size: custom profile width 5-80 mm, larger sections by tooling
    • Color: black standard, other colors by compound review
    • Material: EPDM sponge rubber, closed-cell or semi-closed structure
    • Shape: D, P, E, O, U-channel, hollow bulb, solid strip
    • Surface: extruded skin surface, optional PSA backing or punched holes
    • Use: door seals, cabinet seals, vehicle seals, equipment covers
    Read moreDone