No products were found matching your selection.

Other Related Products

  • Closed Cell EPDM Sponge Rubber

    • Material: closed-cell EPDM sponge rubber
    • Color: black standard, color review available
    • Formats: sheet, roll, block, slit strip
    • Thickness: 1 mm-50 mm typical range
    • Density: soft, medium, firm options
    • Finish: plain or adhesive-backed surface
    Read moreDone

  • PET Heat Resistant Double Sided Tape

    • Material: PET film carrier with double-coated acrylic adhesive
    • Color: Transparent tape with red, yellow, or clear release liner
    • Thickness: 0.05 mm, 0.10 mm, 0.125 mm, 0.20 mm
    • Width: 3 mm-1240 mm slit rolls available
    • Length: 50 m, 100 m, or jumbo roll format
    • Processing: Slitting, die cutting, kiss cutting, sheet cutting
    Read moreDone

  • Custom EPDM Foam Gaskets

    • Material: closed-cell EPDM foam or sponge rubber
    • Color: black standard, grey optional
    • Thickness: 1 mm to 25 mm typical
    • Shapes: frames, rings, washers, strips, and irregular gaskets
    • Adhesive: plain, single-sided PSA, or double-sided PSA
    • Delivery: loose pieces, sheeted parts, or kiss-cut rolls
    Read moreDone

  • Rubber Foam Seal Tape

    • Material: NBR/PVC foam gasket tape
    • Color: Black
    • Structure: Closed-cell rubber foam
    • Adhesive: Single-sided PSA backing
    • Liner: Paper or film release liner
    • Formats: Rolls, strips, die-cut parts
    Read moreDone

  • Adhesive Sponge Rubber Neoprene Tape

    • Material: Closed cell neoprene sponge rubber
    • Adhesive: Single-side acrylic PSA
    • Color: Black as standard
    • Thickness: 1.5-25 mm typical range
    • Width: Slit rolls from 6 mm and above
    • Liner: Paper or film release liner
    Read moreDone

  • Neoprene EPDM Blend Foam

    • Material: Neoprene/EPDM closed-cell foam blend
    • Color: Black as standard
    • Thickness: 1 mm-40 mm typical range
    • Formats: Sheets, rolls, strips, gaskets, tapes
    • Adhesive: Plain, acrylic PSA, or rubber PSA
    • Use: Indoor and outdoor industrial sealing
    Read moreDone

  • EPDM Sponge Rubber Gaskets

    • Typical format: die-cut frame, pad, cover, and enclosure gasket parts
    • Thickness: 1 mm to 25 mm, matched to gap and compression target
    • Material: closed cell EPDM sponge rubber
    • Color: black standard, other colors reviewed by requirement
    • Backing: plain, PSA backed, or kiss-cut on release liner
    • Drawing details: outer size, inner opening, bolt holes, radius, and wall width
    Read moreDone

  • Artificial Grass Tape And Adhesive

    • Common width: 15 cm, 20 cm, 25 cm, 30 cm, or custom
    • Roll length: 5 m, 10 m, 20 m, 50 m, 100 m, 300 m, or custom
    • Color: green backing, white liner, or project-based option
    • Backing material: non-woven fabric, PP cloth, PET film, or composite backing
    • Adhesive option: hot melt, acrylic, or used with turf adhesive glue
    • Type: single-sided, double-sided, self adhesive, or glue-applied system
    Read moreDone

  • Closed Cell Foam Gasket Tape

    •  Material: closed cell PVC, PE, EPDM, or neoprene blend foam
    •  Structure: single sided PSA with paper or film release liner
    •  Thickness: 1 mm-12 mm, with custom thickness available
    •  Roll width: 5 mm-1000 mm slit rolls or master rolls
    •  Colors: black, gray, white, or custom color by grade
    •  Uses: enclosure, HVAC, cabinet, and equipment panel sealing
    Read moreDone