No products were found matching your selection.
Other Related Products
-
- Thickness: 3 mm-30 mm typical range for strips, rolls, and sheets
- Density: 80-130 kg/m3 for soft compression and recovery
- Color: black, grey, or project-specific color options
- Material: semi-closed cell EPDM sponge for controlled sealing
- Backing: plain foam or PSA laminated foam with release liner
- Use: automotive HVAC, access panels, air ducts, and converted foam strips
-
- Material: closed cell PVC, PE, EPDM, or neoprene blend foam
- Structure: single sided PSA with paper or film release liner
- Thickness: 1 mm-12 mm, with custom thickness available
- Roll width: 5 mm-1000 mm slit rolls or master rolls
- Colors: black, gray, white, or custom color by grade
- Uses: enclosure, HVAC, cabinet, and equipment panel sealing
-
- Width: 90mm / 100mm
- Roll Length: 20m / 25m / 50m
- Structure: Kraft paper and fiberglass
- Adhesive: Hot melt glue
- Color: White / yellow / gold
- Use: Carpet back seam joining
-
- Size: custom profile width 5-80 mm, larger sections by tooling
- Color: black standard, other colors by compound review
- Material: EPDM sponge rubber, closed-cell or semi-closed structure
- Shape: D, P, E, O, U-channel, hollow bulb, solid strip
- Surface: extruded skin surface, optional PSA backing or punched holes
- Use: door seals, cabinet seals, vehicle seals, equipment covers
-
- Material: closed-cell EPDM sponge rubber
- Color: black standard, color review available
- Formats: sheet, roll, block, slit strip
- Thickness: 1 mm-50 mm typical range
- Density: soft, medium, firm options
- Finish: plain or adhesive-backed surface
-
- Material: Neoprene/EPDM closed-cell foam blend
- Color: Black as standard
- Thickness: 1 mm-40 mm typical range
- Formats: Sheets, rolls, strips, gaskets, tapes
- Adhesive: Plain, acrylic PSA, or rubber PSA
- Use: Indoor and outdoor industrial sealing
-
EPDM sponge rubber properties should be read with the material grade and test condition. This reference covers closed-cell EPDM sponge for sealing, cushioning, gasket conversion, and PSA-backed constructions. It focuses on density, compression behavior, water absorption, mechanical response, service temperature, and ozone resistance. Use typical data for technical screening; confirm critical values on the intended grade, surface, load, and environment before full use or project approval.
-
- Common Size: 24 mm, 36 mm, 48 mm, 72 mm, custom slit width
- Color: White adhesive with white or yellow release liner
- Structure: Double coated pressure-sensitive adhesive tape
- Adhesive Type: Rubber-based or hot melt adhesive options
- Thickness Options: Typical 260-400 um total thickness
- Applications: Carpet, mat, exhibition carpet, temporary flooring fixation
-
- Material: PE foam carrier with acrylic or rubber PSA
- Structure: Single-sided or double-sided adhesive coating
- Thickness: 5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Color: White, black, grey, or project-based color
- Liner: Paper liner or PE film liner for converting
- Use: Cushioning, spacing, light sealing, fixing, and die-cut parts
