No products were found matching your selection.
Other Related Products
-


- Material: closed cell PVC, PE, EPDM, or neoprene blend foam
- Structure: single sided PSA with paper or film release liner
- Thickness: 1 mm-12 mm, with custom thickness available
- Roll width: 5 mm-1000 mm slit rolls or master rolls
- Colors: black, gray, white, or custom color by grade
- Uses: enclosure, HVAC, cabinet, and equipment panel sealing
-


- Material: PE foam or EVA foam with double side adhesive coating
- Colors: white, black, grey, or production color by request
- Thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Jumbo width: 1030 mm, 1040 mm, or 1200 mm typical
- Adhesive: solvent acrylic, hot melt, or water-based acrylic
- Format: jumbo roll, master roll, log roll, slit roll, or trial roll
-


- Common thickness: 2 mm, 3 mm, 5 mm, 6 mm, 10 mm, 12 mm
- Color: Black, grey, charcoal grey, or white
- Material: Low-density open-cell polyurethane foam, 24-48 kg/m3 typical
- Adhesive: Single-side acrylic PSA, 40-70 um typical
- Liner: Paper or film release liner, 80-120 um typical
- Use: Compression sealing, cushioning, dust sealing, and die-cut gaskets
-


- Common Size: 24 mm, 36 mm, 48 mm, 72 mm, custom slit width
- Color: White adhesive with white or yellow release liner
- Structure: Double coated pressure-sensitive adhesive tape
- Adhesive Type: Rubber-based or hot melt adhesive options
- Thickness Options: Typical 260-400 um total thickness
- Applications: Carpet, mat, exhibition carpet, temporary flooring fixation
-


- Common thickness: 0.8 mm-6.4 mm or custom
- Common width: 6 mm-25 mm slit rolls
- Color options: Black, white, grey
- Foam options: PE foam or PVC foam
- Adhesive: Double sided acrylic PSA
- Use: Window and door glazing assembly
-


- Material: closed-cell EPDM foam or sponge rubber
- Color: black standard, grey optional
- Thickness: 1 mm to 25 mm typical
- Shapes: frames, rings, washers, strips, and irregular gaskets
- Adhesive: plain, single-sided PSA, or double-sided PSA
- Delivery: loose pieces, sheeted parts, or kiss-cut rolls
-


- Material: closed-cell EPDM sponge rubber
- Color: black standard, color review available
- Formats: sheet, roll, block, slit strip
- Thickness: 1 mm-50 mm typical range
- Density: soft, medium, firm options
- Finish: plain or adhesive-backed surface
-


- Common size: 1 mm-20 mm thickness, custom slit width
- Color: black EPDM foam, liner color optional
- Material: closed cell EPDM foam carrier
- Adhesive: single-sided or double-sided PSA
- Liner: kraft paper, PE-coated paper, or film liner
- Use: sealing, cushioning, bonding, gasket converting
-


- Thickness: 0.4 mm, 0.8 mm, 1.1 mm, 1.6 mm, 2.0 mm, 2.3 mm
- Colors: gray, black, white, clear on request
- Core: closed-cell acrylic foam
- Adhesive: high-bond acrylic PSA
- Liner: red PE film or release paper
- Format: slit rolls, strips, pads, kiss-cut and die-cut parts