No products were found matching your selection.
Other Related Products
-
- Size: custom profile width 5-80 mm, larger sections by tooling
- Color: black standard, other colors by compound review
- Material: EPDM sponge rubber, closed-cell or semi-closed structure
- Shape: D, P, E, O, U-channel, hollow bulb, solid strip
- Surface: extruded skin surface, optional PSA backing or punched holes
- Use: door seals, cabinet seals, vehicle seals, equipment covers
-
- Common widths: 6 mm to 1240 mm slit rolls
- Thickness options: 0.10 mm to 1.50 mm typical
- Adhesive: Double-sided acrylic PSA coating
- Liner: Red PE release liner, 60-100 um typical
- Tape body: Clear or translucent, not red adhesive body
- Use: Metal, glass, plastic, panel, nameplate, trim bonding
-
- Width: 90mm / 100mm
- Roll Length: 20m / 25m / 50m
- Structure: Kraft paper and fiberglass
- Adhesive: Hot melt glue
- Color: White / yellow / gold
- Use: Carpet back seam joining
-
- Material: NBR/PVC foam gasket tape
- Color: Black
- Structure: Closed-cell rubber foam
- Adhesive: Single-sided PSA backing
- Liner: Paper or film release liner
- Formats: Rolls, strips, die-cut parts
-
EPDM sponge rubber properties should be read with the material grade and test condition. This reference covers closed-cell EPDM sponge for sealing, cushioning, gasket conversion, and PSA-backed constructions. It focuses on density, compression behavior, water absorption, mechanical response, service temperature, and ozone resistance. Use typical data for technical screening; confirm critical values on the intended grade, surface, load, and environment before full use or project approval.
-
- Common Width: 10 mm, 15 mm, 20 mm, 25 mm
- Common Thickness: 3 mm, 4 mm, 5 mm, 6 mm
- Color: Black
- Base Material: Fiber, felt, foam, or fiberglass
- Backing: Self adhesive liner
- Use Area: BBQ lid, door, and body edge
-
- Material: PE foam carrier with acrylic or rubber PSA
- Structure: Single-sided or double-sided adhesive coating
- Thickness: 5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Color: White, black, grey, or project-based color
- Liner: Paper liner or PE film liner for converting
- Use: Cushioning, spacing, light sealing, fixing, and die-cut parts
-
- Material: Firm-grade closed-cell EPDM sponge
- Color: Black as standard
- Density: 180-220 kg/m3 typical reference
- Thickness: 2mm-50mm sheet and roll options
- Format: Sheet, roll, slit strip, die-cut pad
- Backing: Plain or adhesive-backed for positioning
-
- Material: Closed cell neoprene sponge rubber
- Adhesive: Single-side acrylic PSA
- Color: Black as standard
- Thickness: 1.5-25 mm typical range
- Width: Slit rolls from 6 mm and above
- Liner: Paper or film release liner
