No products were found matching your selection.

Other Related Products

  • EPDM Foam Adhesive Tape

    • Common size: 1 mm-20 mm thickness, custom slit width
    • Color: black EPDM foam, liner color optional
    • Material: closed cell EPDM foam carrier
    • Adhesive: single-sided or double-sided PSA
    • Liner: kraft paper, PE-coated paper, or film liner
    • Use: sealing, cushioning, bonding, gasket converting
    Read moreDone

  • BBQ Heat Sealing Tape

    • Common Width: 10 mm, 15 mm, 20 mm, 25 mm
    • Common Thickness: 3 mm, 4 mm, 5 mm, 6 mm
    • Color: Black
    • Base Material: Fiber, felt, foam, or fiberglass
    • Backing: Self adhesive liner
    • Use Area: BBQ lid, door, and body edge
    Read moreDone

  • Semi Closed Cell EPDM Foam

    • Thickness: 3 mm-30 mm typical range for strips, rolls, and sheets
    • Density: 80-130 kg/m3 for soft compression and recovery
    • Color: black, grey, or project-specific color options
    • Material: semi-closed cell EPDM sponge for controlled sealing
    • Backing: plain foam or PSA laminated foam with release liner
    • Use: automotive HVAC, access panels, air ducts, and converted foam strips
    Read moreDone

  • Double Sided Acrylic Adhesive Tape

    • Common widths: 6 mm to 1240 mm slit rolls
    • Thickness options: 0.10 mm to 1.50 mm typical
    • Adhesive: Double-sided acrylic PSA coating
    • Liner: Red PE release liner, 60-100 um typical
    • Tape body: Clear or translucent, not red adhesive body
    • Use: Metal, glass, plastic, panel, nameplate, trim bonding
    Read moreDone

  • EPDM Sponge Rubber Extrusions

    • Size: custom profile width 5-80 mm, larger sections by tooling
    • Color: black standard, other colors by compound review
    • Material: EPDM sponge rubber, closed-cell or semi-closed structure
    • Shape: D, P, E, O, U-channel, hollow bulb, solid strip
    • Surface: extruded skin surface, optional PSA backing or punched holes
    • Use: door seals, cabinet seals, vehicle seals, equipment covers
    Read moreDone

  • EPDM Sponge Rubber Properties and Technical Data

    EPDM sponge rubber properties should be read with the material grade and test condition. This reference covers closed-cell EPDM sponge for sealing, cushioning, gasket conversion, and PSA-backed constructions. It focuses on density, compression behavior, water absorption, mechanical response, service temperature, and ozone resistance. Use typical data for technical screening; confirm critical values on the intended grade, surface, load, and environment before full use or project approval.

    Read moreDone

  • Adhesive Sponge Rubber Neoprene Tape

    • Material: Closed cell neoprene sponge rubber
    • Adhesive: Single-side acrylic PSA
    • Color: Black as standard
    • Thickness: 1.5-25 mm typical range
    • Width: Slit rolls from 6 mm and above
    • Liner: Paper or film release liner
    Read moreDone

  • Open Cell Polyurethane Foam Tape

    • Common thickness: 2 mm, 3 mm, 5 mm, 6 mm, 10 mm, 12 mm
    • Color: Black, grey, charcoal grey, or white
    • Material: Low-density open-cell polyurethane foam, 24-48 kg/m3 typical
    • Adhesive: Single-side acrylic PSA, 40-70 um typical
    • Liner: Paper or film release liner, 80-120 um typical
    • Use: Compression sealing, cushioning, dust sealing, and die-cut gaskets
    Read moreDone

  • Artificial Grass Tape And Adhesive

    • Common width: 15 cm, 20 cm, 25 cm, 30 cm, or custom
    • Roll length: 5 m, 10 m, 20 m, 50 m, 100 m, 300 m, or custom
    • Color: green backing, white liner, or project-based option
    • Backing material: non-woven fabric, PP cloth, PET film, or composite backing
    • Adhesive option: hot melt, acrylic, or used with turf adhesive glue
    • Type: single-sided, double-sided, self adhesive, or glue-applied system
    Read moreDone