No products were found matching your selection.

Other Related Products

  • Adhesive Sponge Rubber Neoprene Tape

    • Material: Closed cell neoprene sponge rubber
    • Adhesive: Single-side acrylic PSA
    • Color: Black as standard
    • Thickness: 1.5-25 mm typical range
    • Width: Slit rolls from 6 mm and above
    • Liner: Paper or film release liner
    Read moreDone

  • EPDM Sponge Rubber Gaskets

    • Typical format: die-cut frame, pad, cover, and enclosure gasket parts
    • Thickness: 1 mm to 25 mm, matched to gap and compression target
    • Material: closed cell EPDM sponge rubber
    • Color: black standard, other colors reviewed by requirement
    • Backing: plain, PSA backed, or kiss-cut on release liner
    • Drawing details: outer size, inner opening, bolt holes, radius, and wall width
    Read moreDone

  • EPDM Open Cell Foam – Versatile and Customizable Foam Solutions

    • Material: EPDM Open Cell Foam (Flexible, Lightweight, and Insulating)
    • Thickness: Available from 1/8 inch to 2 inches
    • Color Options: Typically Black, with custom colors available
    • Density: Customizable for specific application requirements (Low to Medium Density)
    • Shape: Supplied in sheets, rolls, or custom-cut pieces for precise application
    • Temperature Range: -40°C to +120°C, ideal for both cold and hot environments
    Read moreDone

  • PET Heat Resistant Double Sided Tape

    • Material: PET film carrier with double-coated acrylic adhesive
    • Color: Transparent tape with red, yellow, or clear release liner
    • Thickness: 0.05 mm, 0.10 mm, 0.125 mm, 0.20 mm
    • Width: 3 mm-1240 mm slit rolls available
    • Length: 50 m, 100 m, or jumbo roll format
    • Processing: Slitting, die cutting, kiss cutting, sheet cutting
    Read moreDone

  • Firm Grade EPDM Sponge

    • Material: Firm-grade closed-cell EPDM sponge
    • Color: Black as standard
    • Density: 180-220 kg/m3 typical reference
    • Thickness: 2mm-50mm sheet and roll options
    • Format: Sheet, roll, slit strip, die-cut pad
    • Backing: Plain or adhesive-backed for positioning
    Read moreDone

  • Double Sided Foam Tape Jumbo Roll

    • Material: PE foam or EVA foam with double side adhesive coating
    • Colors: white, black, grey, or production color by request
    • Thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
    • Jumbo width: 1030 mm, 1040 mm, or 1200 mm typical
    • Adhesive: solvent acrylic, hot melt, or water-based acrylic
    • Format: jumbo roll, master roll, log roll, slit roll, or trial roll
    Read moreDone

  • Rubber Foam Seal Tape

    • Material: NBR/PVC foam gasket tape
    • Color: Black
    • Structure: Closed-cell rubber foam
    • Adhesive: Single-sided PSA backing
    • Liner: Paper or film release liner
    • Formats: Rolls, strips, die-cut parts
    Read moreDone

  • EPDM Closed Cell Foam

    •  Material: closed-cell EPDM sponge rubber
    •  Color: black, with custom color on request
    •  Thickness: 1 mm-50 mm typical
    •  Density grades: soft, medium, firm, 80-220 kg/m3 typical
    •  Supply form: roll, EPDM sponge rubber sheet, slit strip, and cut length
    •  Use: air sealing, water sealing, spacing, cushioning, and outdoor protection
    Read moreDone

  • Building Construction Acrylic Foam Tape

    • Thickness: 0.4 mm, 0.8 mm, 1.1 mm, 1.6 mm, 2.0 mm, 2.3 mm
    • Colors: gray, black, white, clear on request
    • Core: closed-cell acrylic foam
    • Adhesive: high-bond acrylic PSA
    • Liner: red PE film or release paper
    • Format: slit rolls, strips, pads, kiss-cut and die-cut parts
    Read moreDone