No products were found matching your selection.
Other Related Products
-
- Common thickness: 2 mm, 3 mm, 5 mm, 6 mm, 10 mm, 12 mm
- Color: Black, grey, charcoal grey, or white
- Material: Low-density open-cell polyurethane foam, 24-48 kg/m3 typical
- Adhesive: Single-side acrylic PSA, 40-70 um typical
- Liner: Paper or film release liner, 80-120 um typical
- Use: Compression sealing, cushioning, dust sealing, and die-cut gaskets
-
- Material: closed-cell EPDM sponge rubber
- Color: black standard, color review available
- Formats: sheet, roll, block, slit strip
- Thickness: 1 mm-50 mm typical range
- Density: soft, medium, firm options
- Finish: plain or adhesive-backed surface
-
- Material: Closed-cell EVA foam backing
- Adhesive: Hot melt or acrylic adhesive
- Structure: One adhesive side, one exposed foam side
- Thickness: 1 mm – 10 mm typical range
- Liner: Release paper or release film
- Format: Rolls, strips, sheets, or die-cut pads
-
- Width: 90mm / 100mm
- Roll Length: 20m / 25m / 50m
- Structure: Kraft paper and fiberglass
- Adhesive: Hot melt glue
- Color: White / yellow / gold
- Use: Carpet back seam joining
-
- Common widths: 6 mm to 1240 mm slit rolls
- Thickness options: 0.10 mm to 1.50 mm typical
- Adhesive: Double-sided acrylic PSA coating
- Liner: Red PE release liner, 60-100 um typical
- Tape body: Clear or translucent, not red adhesive body
- Use: Metal, glass, plastic, panel, nameplate, trim bonding
-
- Material: PE foam carrier with acrylic or rubber PSA
- Structure: Single-sided or double-sided adhesive coating
- Thickness: 5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Color: White, black, grey, or project-based color
- Liner: Paper liner or PE film liner for converting
- Use: Cushioning, spacing, light sealing, fixing, and die-cut parts
-
- Material: closed cell PVC, PE, EPDM, or neoprene blend foam
- Structure: single sided PSA with paper or film release liner
- Thickness: 1 mm-12 mm, with custom thickness available
- Roll width: 5 mm-1000 mm slit rolls or master rolls
- Colors: black, gray, white, or custom color by grade
- Uses: enclosure, HVAC, cabinet, and equipment panel sealing
-
- Common thickness: 0.8 mm-6.4 mm or custom
- Common width: 6 mm-25 mm slit rolls
- Color options: Black, white, grey
- Foam options: PE foam or PVC foam
- Adhesive: Double sided acrylic PSA
- Use: Window and door glazing assembly
-
- Material: closed-cell EPDM foam or sponge rubber
- Color: black standard, grey optional
- Thickness: 1 mm to 25 mm typical
- Shapes: frames, rings, washers, strips, and irregular gaskets
- Adhesive: plain, single-sided PSA, or double-sided PSA
- Delivery: loose pieces, sheeted parts, or kiss-cut rolls
