No products were found matching your selection.
Other Related Products
-
EPDM sponge rubber properties should be read with the material grade and test condition. This reference covers closed-cell EPDM sponge for sealing, cushioning, gasket conversion, and PSA-backed constructions. It focuses on density, compression behavior, water absorption, mechanical response, service temperature, and ozone resistance. Use typical data for technical screening; confirm critical values on the intended grade, surface, load, and environment before full use or project approval.
-
- Common thickness: 70um-160um
- Carrier: lightweight tissue paper
- Adhesive: acrylic, hot melt, or rubber PSA
- Color: translucent tape with white or yellow liner
- Formats: jumbo roll, log roll, slit roll, die-cut parts
- Use: paper, plastic film, foam, label bonding
-
- Common Width: 10 mm, 15 mm, 20 mm, 25 mm
- Common Thickness: 3 mm, 4 mm, 5 mm, 6 mm
- Color: Black
- Base Material: Fiber, felt, foam, or fiberglass
- Backing: Self adhesive liner
- Use Area: BBQ lid, door, and body edge
-
- Common thickness: 2 mm to 15 mm
- Standard color: black EPDM sponge
- Material: closed cell EPDM sponge rubber
- Backing: one-side pressure sensitive adhesive
- Liner: paper or film release liner
- Supply form: rolls, strips, custom slit widths
-
This double sided tape data sheet explains how construction, thickness, peel adhesion, tack, static shear, temperature and storage data should be interpreted together. It applies to carrier-based and foam-supported pressure-sensitive double-sided tapes used on metal, glass, plastics and coated surfaces. Typical values are reference data rather than universal claims. Surface condition, application pressure, dwell, environment and load can change results, so the selected grade should be confirmed on representative samples before production release.
-
- Material: Closed cell neoprene sponge rubber
- Adhesive: Single-side acrylic PSA
- Color: Black as standard
- Thickness: 1.5-25 mm typical range
- Width: Slit rolls from 6 mm and above
- Liner: Paper or film release liner
-
- Common widths: 6 mm to 1240 mm slit rolls
- Thickness options: 0.10 mm to 1.50 mm typical
- Adhesive: Double-sided acrylic PSA coating
- Liner: Red PE release liner, 60-100 um typical
- Tape body: Clear or translucent, not red adhesive body
- Use: Metal, glass, plastic, panel, nameplate, trim bonding
-
- Material: Neoprene/EPDM closed-cell foam blend
- Color: Black as standard
- Thickness: 1 mm-40 mm typical range
- Formats: Sheets, rolls, strips, gaskets, tapes
- Adhesive: Plain, acrylic PSA, or rubber PSA
- Use: Indoor and outdoor industrial sealing
-
- Thickness: 0.4 mm, 0.8 mm, 1.1 mm, 1.6 mm, 2.0 mm, 2.3 mm
- Colors: gray, black, white, clear on request
- Core: closed-cell acrylic foam
- Adhesive: high-bond acrylic PSA
- Liner: red PE film or release paper
- Format: slit rolls, strips, pads, kiss-cut and die-cut parts
